150 Litre Air Distribution Manifold

Portable Elcometer High Volume Air Distribution Manifolds (ADM) are designed to maintain a consistent air supply to multiple air powered devices.

  • Heavy duty 6mm (¼”) construction steel thickness
  • Supplied with plug as standard
  • Supply up to 6 different air powered devices
  • Inbuilt moisture trap and baffle separates moisture from air supply
  • Designed for use with air compressors, up to a maximum working pressure of 15bar (217psi)
  • Built in lifting lugs and wheels for easy manoeuvring around site

Description

When connecting multiple air powered devices to a single compressor, the demands on air flow can vary as each device switches on or off. An air distribution manifold (ADM) can reduce fluctuations in demand, acting as a buffer, to provide a more consistent air supply to multiple devices.

Elcometer’s Air Distribution Manifolds are designed with a range of features and benefits and the ability to connect up to 6 different air powered appliances at any one time, depending on the model.

The Elcometer Air Distribution Manifold is supplied with plugs so that when an air outlet is not in use, the compressed air does not escape.

The ADM features a moisture separation system to ensure there is no moisture in the compressed air that is dispensed, this works by cooling the air so that the water particles are removed, the water then drips out of the adjustable ball valve exiting the air distribution manifold.

150 litre (5.3cu ft) Air Distribution Manifold with 5 outlets

PED

  • Volume :150 litres (5.3cu ft)
  • Maximum Working Pressure :15bar (217psi)
  • Weight (kg / lbs) :125kg (275.6lb)
  • Pot Diameter :492mm (192/5“)
  • Height :1155mm (451/2“)
  • Width :762.3mm (30″)
  • Air Inlet :1 x 50.8mm (2″)
  • Number of Air Outlet Points :5
  • Air Outlet Dimensions :1 x 50.8mm (2″), 4 x 31.75mm (11/4“)
  • Pressure Relief Valve Outlet :1 x 25.4mm (1″)
  • Drain Outlet :1 x 19mm (3/4“) Ball Valve
  • Operating Temperature :0 to 60°C (32 to 140°F)
  • Part Number :ADM150

ASME

  • Volume :5.3cu ft (150 litres)
  • Maximum Working Pressure :217psi (15bar)
  • Weight (kg / lbs) :275.6lb (125kg)
  • Pot Diameter :192/5” (492mm)
  • Height :451/2” (1155mm)
  • Width :30″ (762.3mm)
  • Air Inlet :1 x 2″ (50.8mm)
  • Number of Air Outlet Points :5
  • Air Outlet Dimensions :1 x 2″ (50.8mm), 4 x 11/4” (31.75mm)
  • Pressure Relief Valve Outlet :1 x 1″ (25.4mm)
  • Drain Outlet :1 x 3/4” (19mm) Ball Valve
  • Operating Temperature :32 to 140°F (0 to 60°C )
  • Part Number :ADM150N

PED

Part NumberADM75ADM150ADM300
Capacity75 litres (2.6cu ft)150 litres (5.3cu ft)300 litres (10.6cu ft)
Pot Diameter353mm (139/10”)492mm (192/5“)604mm (234/5“)
Height1155mm (451/2“)1155mm (451/2“)1365mm (534/5“)
Width663mm (261/10“)762.3mm (30″)846mm (333/10“)
Weight90kg (198.4lb)125kg (275.6lb)205kg (452lb)
Air Inlet1 x 50.8mm (2”) BSP1 x 50.8mm (2”) BSP1 x 76.2mm (3”) BSP1
Number of Air Outlet Points556
Air Outlet Dimensions1 x 50.8mm (2”) BSP24 x 31.75mm (11/4“) BSP1 x 50.8mm (2”) BSP24 x 31.75mm (11/4“) BSP2 x 50.8mm (2”) BSP24 x 31.75mm (11/4“) BSP
Pressure Relief Valve Outlet1 x 25.4mm (1”) BSP31 x 25.4mm (1”) BSP31 x 25.4mm (1”) BSP3
Drain Outlet1 x 19mm (3/4“) BSP Ball Valve1 x 19mm (3/4“) BSP Ball Valve1 x 19mm (3/4“) BSP Ball Valve
Max Working Pressure (WP)15bar (217psi)15bar (217psi)15bar (217psi)
Operating Temperature Range0 to 60°C (32 to 140°F)0 to 60°C (32 to 140°F)0 to 60°C (32 to 140°F)

 

1 With 76.2mm (3”) to 50.8mm (2”) removable reducing bush fitted

2 With 50.8mm (2”) to 38.1mm (11/2”) removable reducing bush

3 To fit Elcometer PRV, a 12.7mm (0.5”) reducing bush is required.

ASME
Part NumberADM75NADM150NADM300N
Capacity2.6cu ft (75 litres)5.3cu ft (150 litres)10.6cu ft (300 litres)
Pot Diameter139/10” (353mm)192/5” (492mm)234/5”  (604mm)
Height451/2” (1155mm)451/2” (1155mm)534/5”  (1365mm)
Width261/10” (663mm)30” (762.3mm)333/10” (846mm)
Weight90kg (198.4lb)125kg (275.6lb)205kg (452lb)
Air Inlet1 x 2” (50.8mm)1 x 2” (50.8mm)1 x 3” (76.2mm) 1
Number of Air Outlet Points556
Air Outlet Dimensions1 x 2” (50.8mm)2
4 x 1¼” (31.75mm)
1 x 2” (50.8mm)2
4 x 1¼” (31.75mm)
2 x 2“(50.8mm)2
4 x 1¼” (31.75mm)
Pressure Relief Valve Outlet1 x 1” (25.4mm)31 x 1” (25.4mm)31 x 1” (25.4mm)3
Drain Outlet1 x 3/4” (19mm) Ball Valve1 x 3/4” (19mm) Ball Valve1 x 3/4” (19mm) Ball Valve
Max Working Pressure (WP)15bar (217psi)15bar15bar
Operating Temperature Range32 to 140°F
(0 to 60°C)
32 to 140°F
(0 to 60°C)
32 to 140°F
(0 to 60°C)

1 With 3” (76.2mm) to 2” (50.8mm) removable reducing bush fitted

2 With 2” (50.8mm) to 11/2” (38.1mm) removable reducing bush

3 To fit Elcometer PRV, a 0.5” (12.7mm) reducing bush is required

PED

Elcometer 150L Air Distribution Manifold Spare Parts

Elcometer 150L Air Distribution Manifold Spare Parts
ItemPart NumberDescription
1MT301812″ – 112” BSP Reducing Bush
2MT301832″ BSPT Plain Plug Solid
3MT3018212” BSPT Plain Plug Solid
4MT3018414” BSPT Plain Plug Solid (x4)
5MT296811″ BSPT Plain Plug Solid
6MT3009534” (19mm) Ball Valve Handle
7MT2861034” (19mm) Ball Valve Assembly (includes MT30095 Ball Valve Handle)
8MT28636Ø250mm (9.8″) Diameter Wheel (x1)
9MT29697Flat Washer (x4)
10MT29698Split Cotter Pin (x4)
11MT29601Protective Edging Strip Kit (2.7m) (8.9ft)
MT29180Elcometer Safety Label Kit

 

ASME

Elcometer 150L Air Distribution Manifold Spare Parts

Elcometer 150L Air Distribution Manifold Spare Parts
ItemPart NumberDescription
1MT30181N2″ – 112” BSP Reducing Bush
2MT30183N2″ BSPT Plain Plug Solid
3MT30182N12” BSPT Plain Plug Solid
4MT30184N14” BSPT Plain Plug Solid (x4)
5MT29681N1″ BSPT Plain Plug Solid
6MT30095N34” (19mm) Ball Valve Handle
7MT28610N34” (19mm) Ball Valve Assembly (includes MT30095 Ball Valve Handle)
8MT28636Ø250mm (9.8″) Diameter Wheel (x1)
9MT29697Flat Washer (x4)
10MT29698Split Cotter Pin (x4)
11MT29601Protective Edging Strip Kit (2.7m) (8.9ft)
MT29180Elcometer Safety Label Kit