Elcometer 12 Bar (174psi) Blast Hose
12_bar_blast_hose

Elcometer 12 Bar (174psi) Blast Hose

The Elcometer Blast Hose is available in anti-static 40m (131ft) lengths and a number of hose diameters, in 12bar (174psi) so you can prepare your blast hose to suit your application.

Categories: ,
OFFER REQUEST

Description

Tough Outer Cover

Preserving the condition of an abrasive blast hose is essential to achieve optimal abrasive blasting efficiency. When a blast hose becomes worn, increased pressure losses take place as air passing through the blast hose becomes more turbulent, that’s why Elcometer blast hoses are manufactured using abrasion resistant and anti-static natural and styrene-butadiene rubber with a cloth impression, the tough weather resistant cover prolongs the life of the blast hose.

2 Ply Braid Reinforcement

Elcometer blast hoses feature highly woven cord linings in a 2 ply cross pattern to improve blast hose strength and allow flexibility.

Anti-Static and Abrasion Resistant Inner Wall

The Elcometer blast hose is manufactured out of natural and styrene-butadiene rubber compound with carbon black, has an abrasion resistance value of 50mm3 in accordance with DIN53516 and has an anti-static rating (R) of R<106 Ω/m. This dissipates static electricity to the ground to protect the blaster from injuries caused by a static shock.

Flexible, anti-static, light weight and incredibly tough, Elcometer’s range of 2 ply blast hose is available with a working pressure of 12bar (174psi) with a 3 times safety margin.

Elcometer 1/2” (13mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder (Fine Thread) & Cast Iron Quick Coupling – 5m (16.4ft)

BSP Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :13mm (1/2“)
  • Thread Type :3/4” (19mm) Fine
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :28mm (11/8“)
  • Minimum Bend Radius :105mm (49/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH13NFSB-5

NPT / NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1/2” (13mm)
  • Thread Type :3/4” (19mm) Fine
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :11/8” (28mm)
  • Minimum Bend Radius :49/64” (105mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH13NFSN-5

Elcometer 1/2” (13mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder (Fine Thread) & Cast Iron Quick Coupling – 10m (32.8ft)

BSP Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :13mm (1/2“)
  • Thread Type :3/4” (19mm) Fine
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :28mm (11/8“)
  • Minimum Bend Radius :105mm (49/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH13NFSB-10

NPT / NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1/2” (13mm)
  • Thread Type :3/4” (19mm) Fine
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :11/8” (28mm)
  • Minimum Bend Radius :49/64” (105mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH13NFSN-10

Elcometer 3/4” (19mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :19mm (3/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :34mm (13/8“)
  • Minimum Bend Radius :155mm (67/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH19NCNB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :3/4” (19mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :13/8” (34mm)
  • Minimum Bend Radius :67/64” (155mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH19NNNN-5

Elcometer 3/4” (19mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :19mm (3/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :34mm (13/8“)
  • Minimum Bend Radius :155mm (67/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH19NCNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :3/4” (19mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :13/8” (34mm)
  • Minimum Bend Radius :67/64” (155mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH19NNNN-10

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH25NCNB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH25NNNN-5

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH25NCNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH25NNNN-10

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Cast Iron Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH25ACSB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH25ANSN-5

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Cast Iron Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH25ACSB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH25ANSN-10

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Cast Iron Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH25NCSB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH25NNSN-5

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Cast Iron Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH25NCSB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH25NNSN-10

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Nylon Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH25ACNB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH25ANNN-5

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH25ACNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH25ANNN-10

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH32NCNB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH32NNNN-5

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH32NCNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH32NNNN-10

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Cast Iron Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH32ACSB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH32ANSN-5

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Cast Iron Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH32ACSB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH32ANSN-10

Elcometer 11/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Cast Iron Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH32NCSB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH32NNSN-5

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Cast Iron Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH32NCSB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH32NNSN-10

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Nylon Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH32ACNB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH32ANNN-5

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH32ACNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH32ANNN-10

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH38NCNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH38NNNN-10

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 20m (65.6ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :20m (65.6ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH38NCNB-20

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :65.6ft (20m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH38NNNN-20

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Cast Iron Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH38ACSB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH38ANSN-10

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Cast Iron Quick Coupling – 20m (65.6ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :20m (65.6ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH38ACSB-20

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :65.6ft (20m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH38ANSN-20

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Cast Iron Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH38NCSB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH38NNSN-10

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Cast Iron Quick Coupling – 20m (65.6ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :20m (65.6ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH38NCSB-20

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :65.6ft (20m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH38NNSN-20

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH38ACNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH38ANNN-10

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Nylon Quick Coupling – 20m (65.6ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :20m (65.6ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH38ACNB-20

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :65.6ft (20m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH38ANNN-20
PED
Part NumberBH13NFSB-5BH13NFSB-10
Hose Length5m (16.4ft)10m (32.8ft)
Nozzle HolderNylonNylon
Thread Type3/4″ Fine3/4″ Fine
Quick CouplingCast IronCast Iron
Maximum Working Pressure12bar (174psi)12bar (174psi)
Internal Diameter (ID)13mm (1/2“)13mm (1/2“)
Outside Diameter (OD)28mm (11/8“)28mm (11/8“)
Minimum Bend Radius105mm (49/64“)105mm (49/64“)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)

 

ASME
Part NumberBH13NFSN-5BH13NFSN-10
Hose Length16.4ft (5m)32.8ft (10m)
Nozzle HolderNylonNylon
Thread Type3/4″ Fine3/4″ Fine
Quick CouplingCast IronCast Iron
Maximum Working Pressure174psi (12bar)174psi (12bar)
Internal Diameter (ID)1/2” (13mm)1/2” (13mm)
Outside Diameter (OD)11/8” (28mm)11/8” (28mm)
Minimum Bend Radius49/64” (105mm)49/64” (105mm)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)
PED
Part NumberBH19NCNB-5BH19NCNB-10
Hose Length5m (16.4ft)10m (32.8ft)
Nozzle HolderNylonNylon
Thread Type2″ Contractor2″ Contractor
Quick CouplingNylonNylon
Maximum Working Pressure12bar (174psi)12bar (174psi)
Internal Diameter (ID)19mm (3/4)19mm (3/4)
Outside Diameter (OD)34mm (13/8“)34mm (13/8“)
Minimum Bend Radius155mm (67/64“)155mm (67/64“)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)

 

ASME
Part NumberBH19NNNN-5BH19NNNN-10
Hose Length16.4ft (5m)32.8ft (10m)
Nozzle HolderNylonNylon
Thread Type11/4” NPSM11/4” NPSM
Quick CouplingNylonNylon
Maximum Working Pressure174psi (12bar)174psi (12bar)
Internal Diameter (ID)3/4″ (19mm)3/4″ (19mm)
Outside Diameter (OD)13/8” (34mm)13/8” (34mm)
Minimum Bend Radius67/64” (155mm)67/64” (155mm)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)
PED
Part NumberBH25NCNB-5BH25NCNB-10BH25ACSB-5BH25ACSB-10BH25NCSB-5BH25NCSB-10BH25ACNB-5BH25ACNB-10
Hose Length5m (16.4ft)10m (32.8ft)5m (16.4ft)10m (32.8ft)5m (16.4ft)10m (32.8ft)5m (16.4ft)10m (32.8ft)
Nozzle HolderNylonNylonAluminiumAluminiumNylonNylonAluminiumAluminium
Thread Type2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor
Quick CouplingNylonNylonCast IronCast IronCast IronCast IronNylonNylon
Maximum Working Pressure12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)
Internal Diameter (ID)25mm (1″)25mm (1″)25mm (1″)25mm (1″)25mm (1″)25mm (1″)25mm (1″)25mm (1″)
Outside Diameter (OD)38mm (11/2“)38mm (11/2“)38mm (11/2“)38mm (11/2“)38mm (11/2“)38mm (11/2“)38mm (11/2“)38mm (11/2“)
Minimum Bend Radius200mm (7 7/8 “)200mm (7 7/8 “)200mm (7 7/8 “)200mm (7 7/8 “)200mm (7 7/8 “)200mm (7 7/8 “)200mm (7 7/8 “)200mm (7 7/8 “)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating (R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)

 

ASME
Part NumberBH25NNNN-5BH25NNNN-10BH25ANSN-5BH25ANSN-10BH25NNSB-5BH25NNSB-10BH25ANNN-5BH25ANNN-10
Hose Length16.4ft (5m)32.8ft (10m)16.4ft (5m)32.8ft (10m)16.4ft (5m)32.8ft (10m)16.4ft (5m)32.8ft (10m)
Nozzle HolderNylonNylonAluminiumAluminiumNylonNylonAluminiumAluminium
Thread Type11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM
Quick CouplingNylonNylonCast IronCast IronCast IronCast IronNylonNylon
Maximum Working Pressure174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)
Internal Diameter (ID)1″ (25mm)1″ (25mm)1″ (25mm)1″ (25mm)1″ (25mm)1″ (25mm)1″ (25mm)1″ (25mm)
Outside Diameter (OD)11/2” (38mm)11/2” (38mm)11/2” (38mm)11/2” (38mm)11/2” (38mm)11/2” (38mm)11/2” (38mm)11/2” (38mm)
Minimum Bend Radius77/8” (200mm)77/8” (200mm)77/8” (200mm)77/8” (200mm)77/8” (200mm)77/8” (200mm)77/8” (200mm)77/8” (200mm)
Abrasion Resitance(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)

 

PED
Part NumberBH32NCNB-5BH32NCNB-10BH32ACSB-5BH32ACSB-10BH32NCSB-5BH32NCSB-10BH32ACNB-5BH32ACNB-10
Hose Length5m (16.4ft)10m (32.8ft)5m (16.4ft)10m (32.8ft)5m (16.4ft)10m (32.8ft)5m (16.4ft)10m (32.8ft)
Nozzle HolderNylonNylonAluminiumAluminiumNylonNylonAluminiumAluminium
Thread Type2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor
Quick CouplingNylonNylonCast IronCast IronCast IronCast IronNylonNylon
Maximum Working Pressure12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)
Internal Diameter (ID)32mm (11/4 “)32mm (11/4 “)32mm (11/4 “)32mm (11/4 “)32mm (11/4 “)32mm (11/4 “)32mm (11/4 “)32mm (11/4 “)
Outside Diameter (OD)48mm (17/8 “)48mm (17/8 “)48mm (17/8 “)48mm (17/8 “)48mm (17/8 “)48mm (17/8 “)48mm (17/8 “)48mm (17/8 “)
Minimum Bend Radius260mm (1015/64 “)260mm (1015/64 “)260mm (1015/64 “)260mm (1015/64 “)260mm (1015/64 “)260mm (1015/64 “)260mm (1015/64 “)260mm (1015/64 “)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)

 

ASME
Part NumberBH32NNNN-5BH32NNNN-10BH32ANSN-5BH32ANSN-10BH32NNSN-5BH32NNSN-10BH32ANNN-5BH32ANNN-10
Hose Length16.4ft (5m)32.8ft (10m)16.4ft (5m)32.8ft (10m)16.4ft (5m)32.8ft (10m)16.4ft (5m)32.8ft (10m)
Nozzle HolderNylonNylonAluminiumAluminiumNylonNylonAluminiumAluminium
Thread Type11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM
Quick CouplingNylonNylonCast IronCast IronCast IronCast IronNylonNylon
Maximum Working Pressure174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)
Internal Diameter (ID)11/4 ” (32mm)11/4 ” (32mm)11/4 ” (32mm)11/4 ” (32mm)11/4 ” (32mm)11/4 ” (32mm)11/4 ” (32mm)11/4 ” (32mm)
Outside Diameter (OD)17/8 ” (48mm)17/8 ” (48mm)17/8 ” (48mm)17/8 ” (48mm)17/8 ” (48mm)17/8 ” (48mm)17/8 ” (48mm)17/8 ” (48mm)
Minimum Bend Radius1015/64” (260mm)1015/64” (260mm)1015/64” (260mm)1015/64” (260mm)1015/64” (260mm)1015/64” (260mm)1015/64” (260mm)1015/64” (260mm)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)

 

PED
Part NumberBH38NCNB-10BH38NCNB-20BH38ACSB-10BH38ACSB-20BH38NCSB-10BH38NCSB-20BH38ACNB-10BH38ACNB-20
Hose Length10m (32.8ft)20m (65.6ft)10m (32.8ft)20m (65.6ft)10m (32.8ft)20m (65.6ft)10m (32.8ft)20m (65.6ft)
Nozzle HolderNylonNylonAluminiumAluminiumNylonNylonAluminiumAluminium
Thread Type2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor
Quick CouplingNylonNylonCast IronCast IronCast IronCast IronNylonNylon
Maximum Working Pressure12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)
Internal Diameter (ID)38mm (11/2 “)38mm (11/2 “)38mm (11/2 “)38mm (11/2 “)38mm (11/2 “)38mm (11/2 “)38mm (11/2 “)38mm (11/2 “)
Outside Diameter (OD)56mm (23/16 “)56mm (23/16 “)56mm (23/16 “)56mm (23/16 “)56mm (23/16 “)56mm (23/16 “)56mm (23/16 “)56mm (23/16 “)
Minimum Bend Radius305mm (121/64 “)305mm (121/64 “)305mm (121/64 “)305mm (121/64 “)305mm (121/64 “)305mm (121/64 “)305mm (121/64 “)305mm (121/64 “)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)

 

ASME
Part NumberBH38NNNN-10BH38NNNN-20BH38ANSN-10BH38ANSN-20BH38NNSN-10BH38NNSN-20BH38ANNN-10BH38ANNN-20
Hose Length32.8ft (10m)65.6ft (20m)32.8ft (10m)65.6ft (20m)32.8ft (10m)65.6ft (20m)32.8ft (10m)65.6ft (20m)
Nozzle HolderNylonNylonAluminiumAluminiumNylonNylonAluminiumAluminium
Thread Type11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM
Quick CouplingNylonNylonCast IronCast IronCast IronCast IronNylonNylon
Maximum Working Pressure174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)
Internal Diameter (ID)11/2 ” (38mm)11/2 ” (38mm)11/2 ” (38mm)11/2 ” (38mm)11/2 ” (38mm)11/2 ” (38mm)11/2 ” (38mm)11/2 ” (38mm)
Outside Diameter (OD)23/16” (56mm)23/16” (56mm)23/16” (56mm)23/16” (56mm)23/16” (56mm)23/16” (56mm)23/16” (56mm)23/16” (56mm)
Minimum Bend Radius121/64” (305mm)121/64” (305mm)121/64” (305mm)121/64” (305mm)121/64” (305mm)121/64” (305mm)121/64” (305mm)121/64” (305mm)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)

Blast Hose Assemblies – Data Sheet
Blast Hose Assemblies – Data Sheet (ASME Compatible)