Abrasives used for blast cleaning surfaces can be contaminated with soluble salts due to the source or the re-use of the blasting media.
This contamination can be transferred to the blast cleaned surface and result in accelerated corrosion conditions and also cause premature coating failure, if this contamination is not removed prior to applying the coating.
Testing abrasives on site for soluble salt contamination can be carried out quickly and easily using the Elcometer 138 Abrasive Soluble Salt Test Kit, according to the ASTM D4940 method.
A measured volume of the abrasive is mixed with the same volume of water and agitated to allow any soluble salts to dissolve in the water. The resulting slurry is allowed to settle and the filtered water can then be tested using a conductivity meter.
The Elcometer 138 Abrasive Soluble Salt Test Kit provides all that is needed to carry out the test in the field or in the laboratory.
| Elcometer 138 Abrasive Soluble Salt Test Kit – ASTM D4940
Testing abrasives on site for soluble salt contamination can be carried out quickly and easily using the Elcometer 138 Abrasive Soluble Salt Test Kit, according to the ASTM D4940 method.
|
| Part Number | Description |
| E138-A-CM | Elcometer 138 Abrasive Soluble Salt Test Kit with Elcometer 138 Conductivity Meter |
| Measurement Range | 0μS/cm0 – 19.99mS/cm (see Elcometer 138 Conductivity Meter for full specification) |
| Accuracy | ±2% of full scale (see Elcometer 138 Conductivity Meter for full specification) |
| Dimensions | 456 x 384 x 127mm (18 x 15.1 x 5”) |
| Weight | 2.2kg (4lb 14oz) |
| Packing List | Elcometer 138 Conductivity Meter, 1000ml (33.8 fl oz) bottle of pure distilled water, 100ml & 600ml (3.4 & 20.3 fl oz) glass beakers, 500ml (16.9fl oz) plastic measuring beaker, funnel, stirring rod, box of 100 filter papers, 1 x 14ml (0.47fl oz) standard 1413 μS/cm (1.413 mS/cm) calibration solution, 1 x 14ml (0.47fl oz) conditioning solution, 2 x CR2032 batteries, transit case and user guide |
Türkçe