When using amine cured epoxy resin coatings in a multi-layer system, if the original coating cures in a low ambient temperature and/or in a high humidity environment, problems – referred to in the industry as amine blush can develop.
The presence of amine blush can lead to inter-coat adhesion failures if the film is re-coated.
|
Elcometer 139 Amine Blush Swab Test Kit
The Elcometer 139 Amine Blush Swab Test Kit is a rapid colourimetric test designed solely for the use in the quick and immediate identification of amine blush (carbamates) on the surface of coatings using surface swabs.
|
| Part Number | Description |
| E139—-A | Elcometer 139 Amine Blush Swab Test Kit |
| Dimensions | 172 x 110 x 100mm (6.75 x 4.25 x 4.00”) |
| Weight | 50g (12.3oz) |
| Packing List | 20 x polystyrene sampler test tubes of 1.0ml (0.035fl oz) buffer solution, a test tube of diluent part A solution, a test tube of diluent part B solution, 2 x diluent transfer pipettes, 3 x test part A dropper bottles – containing ACh-E powder (freeze dried), 3 x test part B dropper bottles – containing ATC powder (freeze dried), a test part C dropper bottle – containing chromogen DTNB solution, a bottle of swab solution – containing 25ml (0.89fl oz) of rubbing alcohol (70% IPA), 20 x cotton swabs (q-tips), 2 x swab templates – 2.54 x 2.54cm (1 x 1”), a pair of tweezers, a re-sealable plastic bag for content disposal and operating instructions |
Türkçe