More information

Name:
Field is required!
Field is required!
Company:
Field is required!
Field is required!
E-mail:
Field is required!
Field is required!
Phone Number:
Field is required!
Field is required!
  • - select your country -
  • Åland Islands
  • Afghanistan
  • Albania
  • Algeria
  • American Samoa (US)
  • Andorra
  • Angola
  • Antigua and Barbuda
  • Argentina
  • Armenia
  • Australia
  • Austria
  • Azerbaijan
  • Bahamas
  • Bahrain
  • Bangladesh
  • Barbados
  • Belarus
  • Belgium
  • Belize
  • Benin
  • Bermuda (UK)
  • Bhutan
  • Bolivia
  • Bosnia and Herzegovina
  • Botswana
  • Brazil
  • Brunei
  • Bulgaria
  • Burkina Faso
  • Burma (Myanmar)
  • Burundi
  • Cambodia
  • Cameroon
  • Canada
  • Cape Verde
  • Central African Republic
  • Chad
  • Chile
  • China
  • Colombia
  • Comoros
  • Congo, Democratic Republic of the
  • Congo, Republic of the
  • Cook Islands (NZ)
  • Costa Rica
  • Croatia
  • Cuba
  • Cyprus
  • Czech Republic
  • Denmark
  • Djibouti
  • Dominica
  • Dominican Republic
  • East Timor (Timor-Leste)
  • Ecuador
  • Egypt
  • El Salvador
  • Equatorial Guinea
  • Eritrea
  • Estonia
  • Ethiopia
  • Falkland Islands (UK)
  • Faroe Islands (Denmark)
  • Fiji
  • Finland
  • France
  • French Guiana
  • French Polynesia (France)
  • Gabon
  • Gambia
  • Georgia
  • Germany
  • Ghana
  • Gibraltar (UK)
  • Greece
  • Greenland (Denmark)
  • Grenada
  • Guam (US)
  • Guatemala
  • Guernsey (UK)
  • Guinea
  • Guinea-Bissau
  • Guyana
  • Haiti
  • Honduras
  • Hong Kong (China)
  • Hungary
  • Iceland
  • India
  • Indonesia
  • Iran
  • Iraq
  • Ireland
  • Isle of Man (UK)
  • Israel
  • Italy
  • Ivory Coast
  • Jamaica
  • Japan
  • Jersey (UK)
  • Jordan
  • Kazakhstan
  • Kenya
  • Kiribati
  • Korea, North
  • Korea, South
  • Kosovo
  • Kuwait
  • Kyrgyzstan
  • Laos
  • Latvia
  • Lebanon
  • Lesotho
  • Liberia
  • Libya
  • Liechtenstein
  • Lithuania
  • Luxembourg
  • Macau (China)
  • Macedonia
  • Madagascar
  • Malawi
  • Malaysia
  • Maldives
  • Mali
  • Malta
  • Marshall Islands
  • Mauritania
  • Mauritius
  • Mayotte (France)
  • Mexico
  • Micronesia, Federated States of
  • Moldova
  • Monaco
  • Mongolia
  • Montenegro
  • Morocco
  • Mozambique
  • Namibia
  • Nauru
  • Nepal
  • Netherlands
  • New Caledonia (France)
  • New Zealand
  • Nicaragua
  • Niger
  • Nigeria
  • Niue (NZ)
  • Norfolk Island (Australia)
  • Northern Mariana Islands (US)
  • Norway
  • Oman
  • Pakistan
  • Palau
  • Palestinian territories
  • Panama
  • Papua New Guinea
  • Paraguay
  • Peru
  • Philippines
  • Pitcairn Islands (UK)
  • Poland
  • Portugal
  • Qatar
  • Réunion (France)
  • Romania
  • Russian Federation
  • Rwanda
  • São Tomé and Príncipe
  • Saint Helena, Ascension and Tristan da Cunha (UK)
  • Saint Kitts and Nevis
  • Saint Lucia
  • Saint Pierre and Miquelon (France)
  • Saint Vincent and the Grenadines
  • Samoa
  • San Marino
  • Saudi Arabia
  • Senegal
  • Serbia
  • Seychelles
  • Sierra Leone
  • Singapore
  • Slovakia
  • Slovenia
  • Solomon Islands
  • Somalia
  • South Africa
  • South Sudan
  • Spain
  • Sri Lanka
  • Sudan
  • Suriname
  • Svalbard and Jan Mayen (Norway)
  • Swaziland
  • Sweden
  • Switzerland
  • Syria
  • Taiwan
  • Tajikistan
  • Tanzania
  • Thailand
  • Togo
  • Tokelau (NZ)
  • Tonga
  • Trinidad and Tobago
  • Tunisia
  • Turkey
  • Turkmenistan
  • Tuvalu
  • Uganda
  • Ukraine
  • United Arab Emirates
  • United Kingdom
  • United States
  • Uruguay
  • Uzbekistan
  • Vanuatu
  • Vatican City
  • Venezuela
  • Vietnam
  • Wallis and Futuna (France)
  • Western Sahara
  • Yemen
  • Zambia
  • Zimbabwe
- select your country -
Field is required!
Field is required!
Write down the features you need or details about your application.
Field is required!
Field is required!

Elcometer 456 Coating Thickness Gauge Probe Range

Ferrous coating thickness gauge probes measure non magnetic coatings on ferro-magnetic substrates. Elcometer 456 coating thickness ferrous gauges accept any ferrous probe.

Non-ferrous coating thickness gauge probes measure non conductive coatings on non-ferrous metal substrates and Elcometer 456 non-ferrous gauges accept any non-ferrous probe.

Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection. Elcometer 456 FNF coating thickness gauges accept all ferrous, non-ferrous and dual FNF probes.

PRODUCT RANGE

 Elcometer 456 Coating Thickness Gauge 45° Angle Mini Probe – Scale 0.5

  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 300mm (11.80”)
  • Minimum Headroom: 18mm (0.71”)
  • Minimum Sample Diameter: 3mm (0.12”)
  • Part Number : T456CFM3R45D
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 300mm (11.80”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 3mm (0.12”)
  • Part Number : T456CFM3R90D
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 150mm (5.90”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 3mm (0.12”)
  • Part Number : T456CFM3R90C
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Mini Probe – Scale 0.5
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 150mm (5.90”)
  • Minimum Headroom: 6mm (0.24”)
  • Minimum Sample Diameter: 3mm (0.12”)
  • Part Number : T456CFM3—C
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 45° Angle Mini Probe – Scale 0.5
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 3mm (0.12”)
  • Part Number : T456CFM3R45A
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 3mm (0.12”)
  • Part Number : T456CFM3R90A
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Mini Probe – Scale 0.5
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 6mm (0.24”)
  • Minimum Sample Diameter: 3mm (0.12”)
  • Part Number : T456CFM3—A
  • Certification : Test Certificate
 Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5

  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 400mm (15.70”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CNM3R90E
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 150mm (5.90”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CNM3R90C
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Mini Probe – Scale 0.5
  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 150mm (5.90”)
  • Minimum Headroom: 6mm (0.24”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CNM3—C
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5

  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CNM3R90A
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Mini Probe – Scale 0.5
  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mils
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 6mm (0.24”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CNM3—A
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
  • Substrate Probe: Non-Ferrous – Graphite (N)
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 400mm (15.70”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CNMG3R90E
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
  • Substrate Probe: Non-Ferrous – Graphite (N)
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 150mm (5.90”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CNMG3R90C
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
  • Substrate Probe: Non-Ferrous – Graphite (N)
  • Range: 0-500μm, 0-20mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CNMG3R90A
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 45° Angle Mini Probe – Scale FM7
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0.60-3.8mm, 25-150mils
  • Accuracy: ±7.5% or ±114μm, ±7,5% or ±4,5mils
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 20mm (0.79”)
  • Minimum Sample Diameter: 6.5 mm (0.26’’)
  • Part Number : T456CFM7R45A
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 1
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 85mm (3.35”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CF1S
  • Certification : Test Certificate
 Elcometer 456 Coating Thickness Gauge Scan Probe – Scale 1

  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 86mm (3.38”)
  • Minimum Sample Diameter: 15mm (0.59”)
  • Part Number : T456CF1U
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Scan Probe Armoured – Scale 1
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 140mm (5.51”)
  • Minimum Sample Diameter: 15mm (0.59”)
  • Part Number : T456CF1UARM
  • Certification : Test Certificate
 Elcometer 456 Coating Thickness Gauge 90° Probe – Scale 1

  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 28mm (1.10”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CF1R
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Mini Probe – Scale 1
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CFM5R90A
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Mini Probe sealed – Scale 1
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CFME5R90A
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Mini Probe sealed, 2m cable – Scale 1
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CFME5R90A-2
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe – Scale 1
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Minimum Headroom: 170mm (6.69”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CF1P
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 1
  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 85mm (3.35”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CN1S
  • Certification : Test Certificate
 Elcometer 456 Coating Thickness Gauge Straight Probe sealed – Scale 1

  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 85mm (3.35”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CF1E
  • Certification : Test Certificate
 Elcometer 456 Coating Thickness Gauge 90° Probe – Scale 1

  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 28mm (1.10”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CN1R
  • Certification : Test Certificate
 Elcometer 456 Coating Thickness Gauge Mini 90° Probe – Scale 1

  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CNM5R90A
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Mini 90° Probe – Scale 1
  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 150mm (5.90”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CNM5R90C
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Mini 90° Probe – Scale 1
  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 400mm (15.70”)
  • Minimum Headroom: 16mm (0.63”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CNM5R90E
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe – Scale 1
  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Minimum Headroom: 180mm (7.09”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CN1P
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Anodiser Probe – Scale 1
  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 100mm (3.94”)
  • Minimum Sample Diameter: 4mm (0.16”)
  • Part Number : T456CN1AS
  • Certification : Test Certificate
 Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 1

  • Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 88mm (3.46”)
  • Minimum Sample Diameter: F: 4mm (0.16”), N: 6mm (0.24”)
  • Part Number : T456CFNF1S
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Scan Probe – Scale 1
  • Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 89mm (3.50”)
  • Minimum Sample Diameter: 15mm (0.59”)
  • Part Number : T456CFNF1U
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Probe – Scale 1
  • Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 38mm (1.50”)
  • Minimum Sample Diameter: F: 4mm (0.16”), N: 6mm (0.24”)
  • Part Number : T456CFNF1RCertification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe – Scale 1
  • Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Minimum Headroom: 180mm (7.09”)
  • Minimum Sample Diameter: F: 4mm (0.16”), N: 6mm (0.24”)
  • Part Number : T456CFNF1P
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe Armoured Cable – Scale 1
  • Substrate Probe: Ferrous & Non-Ferrous (FNF) Probes
  • Range: 0-1,500μm, 0-60mils
  • Accuracy: ±1-3% or ±2.5μm, ±1-3% or ±0.1mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 185mm (7.28″)
  • Minimum Sample Diameter: F: 4mm (0.16”), N: 6mm (0.24”)
  • Part Number : T456CFNF1ARM
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 2
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 89mm (3.50”)
  • Minimum Sample Diameter: 8mm (0.32”)
  • Part Number : T456CF2S
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe Armoured Cable – Scale 2
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 138mm (5.43”)
  • Minimum Sample Diameter: 8mm (0.32”)
  • Part Number : T456CF2ARM
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Scan Probe – Scale 2
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 90mm (3.54”)
  • Minimum Sample Diameter: 15mm (0.59”)
  • Part Number : T456CF2U
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Probe – Scale 2
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 32mm (1.26”)
  • Minimum Sample Diameter: 8mm (0.32”)
  • Part Number : T456CF2R
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Telescopic Probe – Scale 2
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Probe Length: 56-122cm (22-48”)
  • Minimum Headroom: 36mm (1.42”)
  • Minimum Sample Diameter: 8mm (0.32”)
  • Part Number : T456CF2T
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Soft Coating Probe – Scale 2
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 89mm (3.50”)
  • Minimum Sample Diameter: 8mm (0.32”)
  • Part Number : T456CF2B
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 1m (3’) cable – Scale 2
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 138mm (5.43”)
  • Minimum Sample Diameter: 8mm (0.32”)
  • Part Number : T456CF2SW
  • Certification : Test Certificate
 Elcometer 456 Coating Thickness Gauge Waterproof Probe 5m (15″) cable – Scale 2

  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 138mm (5.43”)
  • Minimum Sample Diameter: 8mm (0.32”)
  • Part Number : T456CF2SW-5
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 15m (45″) cable – Scale 2
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 138mm (5.43”)
  • Minimum Sample Diameter: 8mm (0.32”)
  • Part Number : T456CF2SW-15
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 30m (98″) cable – Scale 2
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 138mm (5.43”)
  • Minimum Sample Diameter: 8mm (0.32”)
  • Part Number : T456CF2SW-30
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 50m (164″) cable – Scale 2
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 138mm (5.43”)
  • Minimum Sample Diameter: 8mm (0.32”)
  • Part Number : T456CF2SW-50
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 75m (250″) cable – Scale 2
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 138mm (5.43”)
  • Minimum Sample Diameter: 8mm (0.32”)
  • Part Number : T456CF2SW-75
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe – Scale 2
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Minimum Headroom: 174mm (6.85”)
  • Minimum Sample Diameter: 8mm (0.32”)
  • Part Number : T456CF2P
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Hi-Temperature PINIP™ – Scale 2
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Minimum Headroom: 174mm (6.85”)
  • Minimum Sample Diameter: 8mm (0.32”)
  • Part Number : T456CF2PHT
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 2
  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-5mm, 0-200mils
  • Accuracy: ±1-3% or ±20μm, ±1-3% or ±1.0mil
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 88mm (3.46”)
  • Minimum Sample Diameter: 14mm (0.55”)
  • Part Number : T456CN2S
  • Certification : Test Certificate

Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 3

  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-13mm, 0-500mils
  • Accuracy: ±1-3% or ±50μm, ±1-3% or ±2.0mils
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 170mm (6.69”)
  • Minimum Sample Diameter: 35mm (1.38”)
  • Part Number : T456CN3S
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 6
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
  • Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 150mm (5.90”)
  • Minimum Sample Diameter: 51 x 51mm2 (2.17 x 2.17 inch2)
  • Part Number : T456CF6S
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe armoured cable – Scale 6
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
  • Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 190mm (7.48”)
  • Minimum Sample Diameter: 51 x 51mm2 (2.17 x 2.17 inch2)
  • Part Number : T456CF6ARM
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 6
  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
  • Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 160mm (6.30”)
  • Minimum Sample Diameter: 58mm (2.29”)
  • Part Number : T456CN6S
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe armoured cable – Scale 6
  • Substrate Probe: Non-Ferrous (N) Probes
  • Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
  • Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 200mm (7.87″)
  • Minimum Sample Diameter: 58mm (2.29”)
  • Part Number : T456CN6ARM
  • Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe armoured cable – Scale 7
  • Substrate Probe: Ferrous (F) Probes
  • Range: 0-31mm, 0-1220mils
  • Accuracy: ±1-3% or ±100μm, ±1-3% or ±4.0mils
  • Probe Length: 45mm (1.77”)
  • Minimum Headroom: 200mm (7.87″)
  • Minimum Sample Diameter: 55 x 55mm2 (2.17 x 2.17 inch2)
  • Part Number : T456CF7ARM
  • Certification : Test Certificate

 

TECHNICAL SPECIFICATION

Scale 0.5: Range : 0-500μm (0-20mils)
Accuracya (±1-3% or ±0.1mil)
Range 0-500μm (0-20mils)
Resolution 0.1μm: 0-100μm (0.01mil: 0-5mils)
1μm: 100-500μm (0.1mil: 5-20mils)
Certificate
Certificate supplied as standard
Description Part Number Minimum Headroom Minimum Sample Diameterb Minimum Convex Surface Diameter Minimum Concave Surface Radius
Ferrous (F)
Straight Mini Probe
Probe Length: 45mm (1.77”)c
T456CFM3—A 6mm (0.24”) 3mm (0.12”) 1.9mm (0.07″) 6.5mm (0.26″)
Right Angle Mini Probe
Probe Length: 45mm (1.77”)c
T456CFM3R90A 16mm (0.63”) 3mm (0.12”) 1.9mm (0.07″) 6.5mm (0.26″)
45° Angle Mini Probe
Probe Length: 45mm (1.77”)c
T456CFM3R45A 16mm (0.63”) 3mm (0.12”) 1.9mm (0.07″) 6.5mm (0.26″)
Straight Mini Probe
Probe Length: 150mm (5.90”)c
T456CFM3—C 6mm (0.24”) 3mm (0.12”) 1.9mm (0.07″) 6.5mm (0.26″)
Right Angle Mini Probe
Probe Length: 150mm (5.90”)c
T456CFM3R90C 16mm (0.63”) 3mm (0.12”) 1.9mm (0.07″) 6.5mm (0.26″)
45° Angle Mini Probe
Probe Length: 300mm (11.80”)c
T456CFM3R45D 18mm (0.71”) 3mm (0.12”) 1.9mm (0.07″) 6.5mm (0.26″)
Right Angle Mini Probe
Probe Length: 300mm (11.80”)c
T456CFM3R90D 16mm (0.63”) 3mm (0.12”) 1.9mm (0.07″) 6.5mm (0.26″)
Non-Ferrous (N)
Straight Mini Probe
Probe Length: 45mm (1.77”)c
T456CNM3—A 6mm (0.24”) 4mm (0.16”) 6mm (0.24″) 8.5mm (0.33″)
Right Angle Mini Probe
Probe Length: 45mm (1.77”)c
T456CNM3R90A 16mm (0.63”) 4mm (0.16”) 6mm (0.24″) 8.5mm (0.33″)
Straight Mini Probe
Probe Length: 150mm (5.90”)c
T456CNM3—C 6mm (0.24”) 4mm (0.16”) 6mm (0.24″) 8.5mm (0.33″)
Right Angle Mini Probe
Probe Length: 150mm (5.90”)c
T456CNM3R90C 16mm (0.63”) 4mm (0.16”) 6mm (0.24″) 8.5mm (0.33″)
Right Angle Mini Probe
Probe Length: 400mm (15.70”)c
T456CNM3R90E 16mm (0.63”) 4mm (0.16”) 6mm (0.24″) 8.5mm (0.33″)
Non-Ferrous – Graphite (N)
Right Angle Mini Probe
Probe Length: 45mm (1.77”)c
T456CNMG3R90A 16mm (0.63”) 4mm (0.16”) 6mm (0.24″) 8.5mm (0.33″)
Right Angle Mini Probe
Probe Length: 150mm (5.90”)c
T456CNMG3R90C 16mm (0.63”) 4mm (0.16”) 6mm (0.24″) 8.5mm (0.33″)
Right Angle Mini Probe
Probe Length: 400mm (15.70”)c
T456CNMG3R90E 16mm (0.63”) 4mm (0.16”) 6mm (0.24″) 8.5mm (0.33″)

 

Scale 1: Range : 0-1500μm (0-60mils)
Accuracyae ±1-3% or ±2.5μm (±1-3% or ±0.1mil)
Ranged 0-1500μm (0-60mils)
Resolution 0.1μm: 0-100μm (0.01mil: 0-5mils)
1μm: 100-1500μm (0.1mil: 5-60mils)
Certificate
Certificate supplied as standard
Description Part Number Minimum Headroom Minimum Sample Diameterb Minimum Convex Surface Diameter Minimum Concave Surface Radius
Ferrous (F)
Straight Probe
Probe Length: 45mm (1.77”)c
T456CF1S 85mm (3.35”) 4mm (0.16”) 4mm (0.16″) 25mm (0.98″)
Straight Probe – sealed
Probe Length: 45mm (1.77”)c
T456CF1E 85mm (3.35”) 4mm (0.16”) 4mm (0.16″) 25mm (0.98″)
Scan Probe
Probe Length: 45mm (1.77”)c
T456CF1U 86mm (3.38”) 15mm (0.59”) Flat Surface Flat Surface
Scan Probe – armoured
Probe Length: 45mm (1.77”)c
T456CF1UARM 140mm (5.51”) 15mm (0.59”) Flat Surface Flat Surface
90° Probe
Probe Length: 45mm (1.77”)c
T456CF1R 28mm (1.10”) 4mm (0.16”) 4mm (0.16″) 25mm (0.98″)
90° Mini Probe
Probe Length: 45mm (1.77”)c
T456CFM5R90A 16mm (0.63”) 4mm (0.16”) 3mm (0.12″) 6.5mm (0.26″)
90° Mini Probe – sealed
Probe Length: 45mm (1.77”)c
T456CFME5R90A 16mm (0.63”) 4mm (0.16”) 3mm (0.12″) 6.5mm (0.26″)
90° Mini Probe – sealed, 2m cable
Probe Length: 45mm (1.77”)c
T456CFME5R90A-2 16mm (0.63”) 4mm (0.16”) 3mm (0.12″) 6.5mm (0.26″)
PINIP™ Integral Probe T456CF1P 170mm (6.69”) 4mm (0.16”) 4mm (0.16″) 60mm (2.36″)
Non-Ferrous (N)
Straight Probe
Probe Length: 45mm (1.77”)c
T456CN1S 85mm (3.35”) 4mm (0.16”) 10mm (0.39″) 10mm (0.39″)
90° Probe
Probe Length: 45mm (1.77”)c
T456CN1R 28mm (1.10”) 4mm (0.16”) 10mm (0.39″) 14mm (0.55″)
Mini 90° Probe
Probe Length: 45mm (1.77”)c
T456CNM5R90A 16mm (0.63”) 4mm (0.16”) 10mm (0.39″) 8.5mm (0.33″)
Mini 90°Probe
Probe Length: 150mm (5.90”)c
T456CNM5R90C 16mm (0.63”) 4mm (0.16”) 10mm (0.39″) 8.5mm (0.33″)
Mini 90° Probe
Probe Length: 400mm (15.7”)c
T456CNM5R90E 16mm (0.63”) 4mm (0.16”) 10mm (0.39″) 8.5mm (0.33″)
Anodiser Probe
Probe Length: 45mm (1.77”)c
T456CN1AS 100mm (3.94”) 4mm (0.16”) 10mm (0.39″) 14mm (0.55″)
PINIP™ Integral Probe T456CN1P 180mm (7.09”) 4mm (0.16”) 10mm (0.39″) 50mm (1.97″)
Ferrous & Non-Ferrous (FNF)
Straight Probe
Probe Length: 45mm (1.77”)c
T456CFNF1S 88mm (3.46”) F: 4mm (0.16”), N: 6mm (0.24”) F: 4mm (0.16″)
N: 26mm (1.02″)
12.5mm (0.49″)
Straight Probe – armoured cable
Probe Length: 45mm (1.77”)c
T456CFNF1ARM 185mm (7.28″) F: 4mm (0.16”), N: 6mm (0.24”) F: 4mm (0.16″)
N: 26mm (1.02″)
12.5mm (0.49″)
Scan Probe
Probe Length: 45mm (1.77”)c
T456CFNF1U 89mm (3.50”) 15mm (0.59”) Flat Surface Flat Surface
Right Angle Probe
Probe Length: 45mm (1.77”)c
T456CFNF1R 38mm (1.50”) F: 4mm (0.16”), N: 6mm (0.24”) F: 4mm (0.16″)
N: 26mm (1.02″)
12.5mm (0.49″)
PINIP™ Integral Probe T456CFNF1P 180mm (7.09”) F: 4mm (0.16”), N: 6mm (0.24”) F: 4mm (0.16″)
N: 26mm (1.02″)
65mm (2.56″)

 

Scale 2: Range : 0-5mm (0-200mils)
Accuracyae ±1-3% or ±20μm (±1-3% or ±1.0mil)
Ranged 0-5mm (0-200mils)
Resolution 1μm: 0-1mm (0.1mil: 0-50mils)
10μm: 1-5mm (1.0mil: 50-200mils)
Certificate
Certificate supplied as standard
Description Part Number Minimum Headroom Minimum Sample Diameterb Minimum Convex Surface Diameter Minimum Concave Surface Radius
Ferrous (F)
Straight Probe
Probe Length: 45mm (1.77”)c
T456CF2S 89mm (3.50”) 8mm (0.32”) 4mm (0.16″) 25mm (0.98″)
Scan Probe
Probe Length: 45mm (1.77”)c
T456CF2U 90mm (3.54”) 15mm (0.59”) Flat Surface Flat Surface
90° Probe
Probe Length: 45mm (1.77”)c
T456CF2R 32mm (1.26”) 8mm (0.32”) 4mm (0.16″) 25mm (0.98″)
Straight Probe – armoured cable
Probe Length: 45mm (1.77”)c
T456CF2ARM 138mm (5.43”) 8mm (0.32”) 4mm (0.16″) 25mm (0.98″)
Telescopic Probe
Probe Length: 56-122cm (22-48”)c
T456CF2T 36mm (1.42”) 8mm (0.32”) 4mm (0.16″) 25mm (0.98″)
Soft Coating Probe
Probe Length: 45mm (1.77”)c
T456CF2B 89mm (3.50”) 8mm (0.32”) Flat Surface Flat Surface
Waterproof Probe – 1m (3’) cable
Probe Length: 45mm (1.77”)c
T456CF2SW 138mm (5.43”) 8mm (0.32”) 4mm (0.16″) 40mm (1.98″)
Waterproof Probe – 5m (15’) cable
Probe Length: 45mm (1.77”)c
T456CF2SW-5 138mm (5.43”) 8mm (0.32”) 4mm (0.16″) 40mm (1.98″)
Waterproof Probe – 15m (45’) cable
Probe Length: 45mm (1.77”)c
T456CF2SW-15 138mm (5.43”) 8mm (0.32”) 4mm (0.16″) 40mm (1.98″)
Waterproof Probe – 30m (98’) cable
Probe Length: 45mm (1.77”)c
T456CF2SW-30 138mm (5.43”) 8mm (0.32”) 4mm (0.16″) 40mm (1.98″)
Waterproof Probe – 50m (164’) cable
Probe Length: 45mm (1.77”)c
T456CF2SW-50 138mm (5.43”) 8mm (0.32”) 4mm (0.16″) 40mm (1.98″)
Waterproof Probe – 75m (250’) cable
Probe Length: 45mm (1.77”)c
T456CF2SW-75 138mm (5.43”) 8mm (0.32”) 4mm (0.16″) 40mm (1.98″)
PINIP™ Integral Probe T456CF2P 174mm (6.85”) 8mm (0.32”) 4mm (0.16″) 60mm (2.36″)
Hi-Temperature PINIP™ T456CF2PHT 174mm (6.85”) 8mm (0.32”) 4mm (0.16″) 60mm (2.36″)
Non-Ferrous (N)
Straight Probe
Probe Length: 45mm (1.77”)c
T456CN2S 88mm (3.46”) 14mm (0.55”) 100mm (3.97″) 150mm (5.90″)
PINIP™ Integral Probe T456CN2P 185mm (7.28″) 14mm (0.55”) 100mm (3.97″) 150mm (5.90″)

 

Scale 3: Range : 0-13mm (0-500mils)
Accuracya ±1-3% or ±50μm (±1-3% or ±2.0mils)
Ranged 0-13mm (0-500mils)
Resolution 1μm: 0-2mm (0.1mil: 0-100mils)
10μm: 2-13mm (1.0mil: 100-500mils)
Certificate
Certificate supplied as standard
Description Part Number Minimum Headroom Minimum Sample Diameterb Minimum Convex Surface Diameter Minimum Concave Surface Radius
Ferrous (F)
Straight Probe
Probe Length: 45mm (1.77”)c
T456CF3S 102mm (4.02”) 14mm (0.55”) 15mm (0.59″) 40mm (1.98″)
PINIP™ Integral Probe T456CF3P 184mm (7.24”) 14mm (0.55”) 15mm (0.59″) 45mm (1.77″)
Non-Ferrous (N)
Straight Probe
Probe Length: 45mm (1.77”)c
T456CN3S 170mm (6.69”) 35mm (1.38”) Flat Surface Flat Surface
Scale FM7: Range: 0.60-3.8mm (25-150mils)
Accuracya ±7.5% or ±114μm (±7.5% or ±4.5mils)
Ranged 0.60-3.8mm (25-150mils)
Resolution 1μm: 0-1mm (0.1mil: 0-139.3mils)
10μm: 1-3.8mm (1.0mil: 39.4-150mils)
Certificate
Certificate supplied as standard
Description Part Number Minimum Headroom Minimum Sample Diameterb Minimum Convex Surface Diameter Minimum Concave Surface Radius
Ferrous (F)
45° Angle Mini Probe
Probe Length: 45mm (1.77”)c
T456CFM7R45A 20mm (0.79”) 6.5 mm (0.26’’)
Scale 6: Range : F: 0-25mm (F: 0-980mils)
N: 0-30mm (N: 0-1200mils)
Accuracya ±1-3% or ±100μm (±1-3% or ±4.0mils)
Ranged F: 0-25mm (F: 0-980mils)
N: 0-30mm (N: 0-1200mils)
Resolution 10μm: 0-2mm (1mil: 0-100mils)
100μm: 2-30mm (10mils: 100-1200mils)
Certificate
Certificate supplied as standard
Description Part Number Minimum Headroom Minimum Sample Diameterb Minimum Convex Surface Diameter Minimum Concave Surface Radius
Ferrous (F)
Straight Probe
Probe Length: 45mm (1.77”)c
T456CF6S 150mm (5.90”) 51 x 51mm2 (2.17 x 2.17 inch2) 35mm (1.40″) 170mm (6.70″)
Straight Probe – armoured cable
Probe Length: 45mm (1.77”)c
T456CF6ARM 190mm (7.48”) 51 x 51mm2 (2.17 x 2.17 inch2) 35mm (1.40″) 170mm (6.70″)
Non-Ferrous (N)
Straight Probe
Probe Length: 45mm (1.77”)c
T456CN6S 160mm (6.30”) 58mm (2.29”) Flat Surface Flat Surface
Straight Probe – armoured cable
Probe Length: 45mm (1.77”)c
T456CN6ARM 200mm (7.87″) 58mm (2.29”) Flat Surface Flat Surface

 

Scale 7: Range : 0-31mm (0-1220mils)
Accuracya ±1-3% or ±100μm (±1-3% or ±4.0mils)
Ranged 0-31mm (0-1220mils)
Resolution 10μm: 0-2mm (1.0mil: 0-100mils)
100μm: 2-31mm (10mils: 100-1220mils)
Certificate
Certificate supplied as standard
Description Part Number Minimum Headroom Minimum Sample Diameterb Minimum Convex Surface Diameter Minimum Concave Surface Radius
Ferrous (F)
Straight Probe armoured cable
Probe Length: 45mm (1.77”)c
T456CF7ARM 200mm (7.87″) 55 x 55mm2 (2.17 x 2.17 inch2) 40mm (1.58″) 170mm (6.70″)

Daha fazla bilgi için

Ad Soyad:
zorunlu alan!
zorunlu alan!
Firma:
zorunlu alan!
zorunlu alan!
E-posta:
zorunlu alan!
zorunlu alan!
Telefon:
zorunlu alan!
zorunlu alan!
  • - Şehir seçiniz -
  • Adana
  • Adıyaman
  • Afyonkarahisar
  • Ağrı
  • Aksaray
  • Amasya
  • Ankara
  • Antalya
  • Ardahan
  • Artvin
  • Aydın
  • Balıkesir
  • Bartın
  • Batman
  • Bayburt
  • Bilecik
  • Bingöl
  • Bitlis
  • Bolu
  • Burdur
  • Bursa
  • Çanakkale
  • Çankırı
  • Çorum
  • Denizli
  • Diyarbakır
  • Düzce
  • Edirne
  • Elazığ
  • Erzincan
  • Erzurum
  • Eskişehir
  • Gaziantep
  • Giresun
  • Gümüşhane
  • Hakkâri
  • Hatay
  • Iğdır
  • Isparta
  • İstanbul
  • İzmir
  • Kahramanmaraş
  • Karabük
  • Karaman
  • Kars
  • Kastamonu
  • Kayseri
  • Kırıkkale
  • Kırklareli
  • Kırşehir
  • Kilis
  • Kocaeli
  • Konya
  • Kütahya
  • Malatya
  • Manisa
  • Mardin
  • Mersin
  • Muğla
  • Muş
  • Nevşehir
  • Niğde
  • Ordu
  • Osmaniye
  • Rize
  • Sakarya
  • Samsun
  • Siirt
  • Sinop
  • Sivas
  • Şanlıurfa
  • Şırnak
  • Tekirdağ
  • Tokat
  • Trabzon
  • Tunceli
  • Uşak
  • Van
  • Yalova
  • Yozgat
  • Zonguldak
- Şehir seçiniz -
zorunlu alan!
zorunlu alan!
İhtiyacınız olan özellikleri veya uygulamanız ile ilgili detayları yazınız
zorunlu alan!
zorunlu alan!