Elcometer Blasting Inspection Kits

The Elcometer Blast Check Kit is a surface preparation inspection kit that provides a range of inspection equipment to test the surface profile and surface contamination of blasted profiles. The Elcometer 456 coating thickness gauge and probe are also available. (order separately if required).

It contains the following parameters:

  • Surface assessment
  • Sandblasting equipment inspection
  • Surface profile
  • Surface contamination


Kit content:

ModelDescriptionKit 1Kit 2
Elcometer 128Visual Surface Standards
Elcometer 102Needle Pressure Gauge
Elcometer 103Blasting Nozzle Device
Elcometer 125Surface Quality Welcome, Sandstone
Elcometer 125Surface Quality Satisfaction, Steel sand
Elcometer 122Testex Replica Tape, Coarse
Elcometer 122Testex Replica Tape, Extra Coarse
Elcometer 124Testex Thickness Gauge
Elcometer 224Digital Surface Roughness Meter, T Model
Elcometer 224Standard Separate Probe
Elcometer 142Dust Tape Test Kit
Elcometer 134Chlorine*Test Surface Test Kit
Elcometer 134Chlorine*Test Abrasive Test Kit
Elcometer 134Chlorine*Test Water Test Kit
Elcometer 138Bresle Salt Kit2
Elcometer 138/2Surface Contamination Test
ElcoMaster®Data Management Software & USB Cable
Part NumberDescription
YKIT-BLAST-1MYKIT-BLAST-1EElcometer Blasting Inspection Kit 1
YKIT-BLAST-2MYKIT-BLAST-2EElcometer Blasting Inspection Kit 2
DimensionsKit 1: 495 x 420 x 175mm
Kit 2: 575 x 475 x 205mm