Graco EcoQuip 2 EQP Dustless Blasting

Graco EcoQuip 2 EQP Dustless Blasting Equipment; Surface preparation, especially when removing long-standing layers of paint or other coatings on the surface, can be a challenging and time-consuming task. Grinding, scraping, heat application, and the use of chemicals (thermochemical stripping) are difficult methods because the adhesive substances that ensure paint adhesion also make paint removal more difficult.

Although many different methods and technologies have been developed for surface preparation and cleaning, wet and dry abrasive blasting processes have become the most common and widely used methods. However, not all abrasive blasting methods are the same, and as a result, finding the most suitable solution for performing the job quickly and with the least amount of dust, water, and material is essential.


Introducing a new portable and powerful blasting solution in surface preparation

Graco’s new EcoQuip2 EQp is not only easy to use, but portable enough to take from one job to another. In addition, this affordable option in vapour abrasive blast equipment reduces dust by up to 92% less than traditional dry blasting. The machine uses very little water, making containment and cleanup of debris simple and less messy than power/pressure washers or other dry and wet abrasive blasting technologies.

Cleaning, restoration and removal

Whether you plan to remove graffiti, gum, mold, soot or glue, or clean and remove damage from fire or smoke, it’s time to consider an alternative to your power/pressure washer, chemical cleaners or hand/bristle tools. Graco’s EQp is a portable and powerful machine that gets the job done quickly and effectively.

Technical Specification

Maximum Air Inlet Pressure

10.3 Bar (150 psi, 1.03 Mpa)

Operating Temperature

1.6° – 43°C (35° – 100°F)

Abrasive Capacity *

100 kg (220 lbs)

Dry Weight

100 kg (220 lbs)

Wet Weight *

227 kg (500 lbs)

Pressure Pot Volume


Air Inlet Connection **

Universal, Chicago-style claw

Blast Connection ***

2 Lug Claw Coupler

Water Inlet Connection ****

3/4 in garden hose connection

* Abrasive Capacity and wet weight using 80 grit garnet.


** A 3/4" Male NPT connects to the universal claw out of the system


*** A 1.25" NPSM connects to the 2 lug claw coupler out of the system


Less than 5.2 m³/min (185 cfm) compressor and 30 meter (100 ft) of hose


Greater than 5.2 m³/min (185 cfm) compressor and 30 meter (100 ft) of hose


  • Steel and concrete surface preparation
  • Graffiti, gum, mold & soot removal
  • Paint & stain removal
  • Wood, concrete, steel cleaning
  • Fire and smoke damage cleaning
  • Brick and patio cleaning
  • Iron fence and railing preparation
  • Limestone, marble and stucco stain removal
  • Polyurethane deck coating removal for yachting
  • Marine on-board coating removal and surface preparation