Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket
This abrasive blast nozzle offers a 35% larger blast pattern than a standard Venturi nozzle with only a small loss in abrasive velocity. Designed to be used on jobs where a more even dispersion of abrasive is required through a larger blast pattern. Supplied with a rubber gasket, it is ideally suited for use with plastic and cereal type abrasive media.
- PRODUCT RANGE
- TECHNICAL SPECIFICATION
- DOCUMENTS & BROCHURES
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.42″ Contractor Thread
1 1/4” NPSM Thread
|
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.52″ Contractor Thread
1 1/4” NPSM Thread
|
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.62″ Contractor Thread
1 1/4” NPSM Thread
|
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.72″ Contractor Thread
1 1/4” NPSM Thread
|
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.82″ Contractor Thread
1 1/4” NPSM Thread
|
PED
| Part Number 2″ Contractor Thread | Nozzle No. | Orifice Diameter | Length | Entry Diameter |
| MT28346-4C | #4 | 6.35mm (1⁄4“) | 149mm (5.86″) | 25mm (0.98”) |
| MT28346-5C | #5 | 8mm (5⁄16“) | 162mm (6.37”) | 25mm (0.98”) |
| MT28346-6C | #6 | 9.5mm (3⁄8“) | 176mm (6.92”) | 25mm (0.98”) |
| MT28346-7C | #7 | 11mm (7⁄16“) | 216mm (8.50”) | 25mm (0.98”) |
| MT28346-8C | #8 | 12.5mm (1⁄2“) | 235mm (9.25”) | 25mm (0.98”) |
| Part Number NPSM Thread | Nozzle No. | Orifice Diameter | Length | Entry Diameter |
| MT28346-4N | #4 | 1⁄4” (6.35mm) | 5.86” (149mm) | 0.98” (25mm) |
| MT28346-5N | #5 | 5⁄16” (8mm) | 6.37” (162mm) | 0.98” (25mm) |
| MT28346-6N | #6 | 3⁄8” (9.5mm) | 6.92” (176mm) | 0.98” (25mm) |
| MT28346-7N | #7 | 7⁄16” (11mm) | 8.50” (216mm) | 0.98” (25mm) |
| MT28346-8N | #8 | 1⁄2” (12.5mm) | 9.25” (235mm) | 0.98” (25mm) |