Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System
Ideal for use in situations when dust control is needed, this abrasive blast nozzle mixes water with the abrasive, reducing the amount of dust displaced into the atmosphere. Featuring an aluminium jacket which provides strength and endurance, this abrasive blast nozzle is recommended for use with harder abrasives. The abrasive blast nozzles are supplied with a rubber gasket.
- PRODUCT RANGE
- TECHNICAL SPECIFICATION
- DOCUMENTS & BROCHURES
PED
| Part Number 2″ Contractor Thread | Nozzle No. | Orifice Diameter | Length | Entry Diameter |
| MT28326-3C | #3 | 4.8mm (3⁄16“) | 120mm (4.72″) | 25mm (0.98″) |
| MT28326-4C | #4 | 6.35mm (1⁄4“) | 150mm (5.9”) | 25mm (0.98”) |
| MT28326-5C | #5 | 8mm (5⁄16“) | 160mm (6.3”) | 25mm (0.98”) |
| MT28326-6C | #6 | 9.5mm (3⁄8“) | 175mm (6.89”) | 25mm (0.98”) |
| MT28326-7C | #7 | 11mm (7⁄16“) | 210mm (8.27”) | 25mm (0.98”) |
| MT28326-8C | #8 | 12.5mm (1⁄2“) | 230mm (9.05”) | 25mm (0.98”) |
| Part Number NPSM Thread | Nozzle No. | Orifice Diameter | Length | Entry Diameter |
| MT28326-3N | #3 | 3⁄16” (4.8mm) | 4.72″ (120mm) | 0.98″ (25mm) |
| MT28326-4N | #4 | 1⁄4” (6.35mm) | 5.9” (150mm) | 0.98” (25mm) |
| MT28326-5N | #5 | 5⁄16” (8mm) | 6.3” (160mm) | 0.98” (25mm) |
| MT28326-6N | #6 | 3⁄8” (9.5mm) | 6.69” (170mm) | 0.98” (25mm) |
| MT28326-7N | #7 | 7⁄16” (11mm) | 8.27″ (210mm) | 0.98” (25mm) |
| MT28326-8N | #8 | 1⁄2” (12.5mm) | 9.05” (230mm) | 0.98” (25mm) |