Twinline Pneumatic Remote Control Hose
Elcometer’s tough 1/4” (6mm) ID Twinline Control Hose prevents tangles and trip hazards compared to using single lines with the blast hose. Durable, reliable and lightweight the Elcometer Twinline Control Hose is constructed using spiral polyester with reinforced rubber. It is available with 1/4” (6mm) female swivel couplings to fit directly to your deadman’s handle and remote control valve outlet.
- PRODUCT RANGE
- DOCUMENTS & BROCHURES
- SPARE PARTS
Twinline Pneumatic Remote Control Hose – 5 metres (16.4ft)BSP Thread
NPT / NPSM Thread
|
Twinline Pneumatic Remote Control Hose – 10 metres (32.8ft)BSP Thread
NPT / NPSM Thread
|
Twinline Pneumatic Remote Control Hose – 20 metres (65.6ft)BSP Thread
NPT / NPSM Thread
|
Twinline Pneumatic Remote Control Hose – Data Sheet
Twinline Pneumatic Remote Control Hose – Data Sheet (ASME Compatible)
PED
| Part Number | TWINLINE-20B |
| Length | 20 metres (65.6ft) |
| Internal Diameter ID | 6mm (1⁄4“) |
| Outside Diameter OD | 13mm (1⁄2“) |
| Construction | Linging Back NR+SBTR+EPDM Rubber |
| Reinforcement | Spiral Polyester Yarn |
| Working Pressure | 20bar (260psi) |
| Burst Pressure | 60bar (870psi) |
| Operating Temperature | -35oC to +80oC (-31oF to 176oF) |
ASME
| Part Number | TWINLINE-20N |
| Length | 65.6ft (20 metres) |
| Internal Diameter ID | 1⁄4” (6mm) |
| Outside Diameter OD | 1⁄2” (13mm) |
| Construction | Linging Back NR+SBTR+EPDM Rubber |
| Reinforcement | Spiral Polyester Yarn |
| Working Pressure | 260psi (20bar) |
| Burst Pressure | 870psi (60bar) |
| Operating Temperature | -31oF to 176oF (-35oC to +80oC) |
PED
| Part Number | TWINLINE-10B |
| Length | 10 metres (32.8ft) |
| Internal Diameter ID | 6mm (1⁄4“) |
| Outside Diameter OD | 13mm (1⁄2“) |
| Construction | Linging Back NR+SBTR+EPDM Rubber |
| Reinforcement | Spiral Polyester Yarn |
| Working Pressure | 20bar (260psi) |
| Burst Pressure | 60bar (870psi) |
| Operating Temperature | -35oC to +80oC (-31oF to 176oF) |
ASME
| Part Number | TWINLINE-10N |
| Length | 10 metres (32.8ft) |
| Internal Diameter ID | 1⁄4” (6mm) |
| Outside Diameter OD | 1⁄2” (13mm) |
| Construction | Linging Back NR+SBTR+EPDM Rubber |
| Reinforcement | Spiral Polyester Yarn |
| Working Pressure | 260psi (20bar) |
| Burst Pressure | 870psi (60bar) |
| Operating Temperature | -31oF to 176oF (-35oC to +80oC) |
PED
| Twinline Pneumatic Remote Control Hose | |||||||
| Part Number | Description | ||||||
| TWINLINE | Twinline Control Hose, bare – 40m (131ft) | ||||||
| MT28600 | Male/ Female BSP Threaded Connectors complete with Hose Clamps for use with Twinline Control Hose, (2 pairs) | ||||||
| HOSETAPE-1 | Black Hose Tape to attach Twinline Control Hose to Blast Hose (1 Roll) | ||||||
| HOSETAPE-3 | Black Hose Tape to attach Twinline Control Hose to Blast Hose (3 Rolls) | ||||||
| MT30532 | 1/4” (6mm) to 1/4” (6mm) Hex Nipple BSP 60° Cone | ||||||
| MT30534 | 1/4” (6mm) Hose Crimping Tool | ||||||
ASME
| Twinline Pneumatic Remote Control Hose | |||||||
| Part Number | Description | ||||||
| TWINLINE | Twinline Control Hose, bare – 40m (131ft) | ||||||
| MT28600N | Male/ Female Threaded Connectors complete with Hose Clamps for use with Twinline Control Hose, (2 pairs) | ||||||
| HOSETAPE-1 | Black Hose Tape to attach Twinline Control Hose to Blast Hose (1 Roll) | ||||||
| HOSETAPE-3 | Black Hose Tape to attach Twinline Control Hose to Blast Hose (3 Rolls) | ||||||
| MT30532N | 1/4” (6mm) to 1/4” (6mm) Hex Nipple 60° Cone | ||||||
| MT30534 | 1/4” (6mm) Hose Crimping Tool | ||||||