The Elcometer 270 Pinhole Detector is a high quality, low voltage detector and is supplied with similar accessories to a high voltage spark tester.
|
Elcometer 270/3 Pinhole Detector
The Elcometer 270 Pinhole Detector is a high quality, low voltage detector and is supplied with similar accessories to a high voltage spark tester.
|
|
Elcometer 270/4 Pinhole Detector
The Elcometer 270 Pinhole Detector is a high quality, low voltage detector and is supplied with similar accessories to a high voltage spark tester.
|
| Elcometer 270/3 Pinhole Detector | Elcometer 270/4 Pinhole Detector | Certificate | |
| Part Number | D270—-3 | D270—-4 | |
| Part Number with Certificate | D270—-3C | D270—-4C |
 |
| Voltage | 9V and 90V | 9V, 67.5V and 90V | |
| Coating Range (Max) | 500µm (20mils) | 500µm (20mils) | |
| Sensitivity | 9V: 90kΩ ±5% 90V: 400kΩ ±5% |
9V: 90kΩ ±5% 67.5V: 125kΩ ±5% 90V: 400kΩ ±5% |
|
| Battery Life (continuous use) |
9V: up to 200 hours 90V: up to 80 hours |
9V: up to 200 hours 67.5V: up to 100 hours 90V: up to 80 hours |
|
| Battery Type | 3 x AA batteries (rechargeable batteries can also be used, but battery life will be reduced by up to 75%) | ||
| Accuracy of Setting | ±5% | ||
| Dimensions | Without wand 210 x 42 x 37mm (8.3 x 1.7 x 1.5”) Standard wand 175mm (6.9”) long (including sponge) |
||
| Weight | 610g (21oz) including wand, cable and batteries | ||
| Packing List | Pinhole Detector, standard wand and flat sponge, 4m (13’ 2”) return lead with crocodile clip, 3 x AA (LR1600) batteries and operating instructions | ||
Türkçe