Daha fazla bilgi için

Ad Soyad:
zorunlu alan!
zorunlu alan!
Firma:
zorunlu alan!
zorunlu alan!
E-posta:
zorunlu alan!
zorunlu alan!
Telefon:
zorunlu alan!
zorunlu alan!
  • - Şehir seçiniz -
  • Adana
  • Adıyaman
  • Afyonkarahisar
  • Ağrı
  • Aksaray
  • Amasya
  • Ankara
  • Antalya
  • Ardahan
  • Artvin
  • Aydın
  • Balıkesir
  • Bartın
  • Batman
  • Bayburt
  • Bilecik
  • Bingöl
  • Bitlis
  • Bolu
  • Burdur
  • Bursa
  • Çanakkale
  • Çankırı
  • Çorum
  • Denizli
  • Diyarbakır
  • Düzce
  • Edirne
  • Elazığ
  • Erzincan
  • Erzurum
  • Eskişehir
  • Gaziantep
  • Giresun
  • Gümüşhane
  • Hakkâri
  • Hatay
  • Iğdır
  • Isparta
  • İstanbul
  • İzmir
  • Kahramanmaraş
  • Karabük
  • Karaman
  • Kars
  • Kastamonu
  • Kayseri
  • Kırıkkale
  • Kırklareli
  • Kırşehir
  • Kilis
  • Kocaeli
  • Konya
  • Kütahya
  • Malatya
  • Manisa
  • Mardin
  • Mersin
  • Muğla
  • Muş
  • Nevşehir
  • Niğde
  • Ordu
  • Osmaniye
  • Rize
  • Sakarya
  • Samsun
  • Siirt
  • Sinop
  • Sivas
  • Şanlıurfa
  • Şırnak
  • Tekirdağ
  • Tokat
  • Trabzon
  • Tunceli
  • Uşak
  • Van
  • Yalova
  • Yozgat
  • Zonguldak
- Şehir seçiniz -
zorunlu alan!
zorunlu alan!
İhtiyacınız olan özellikleri veya uygulamanız ile ilgili detayları yazınız
zorunlu alan!
zorunlu alan!

Elcometer 1615 Değişebilir Darbe Test Kiti

Bir numuneyi belirli bir standarda göre test etmek için, uygun kiti kullanarak kullanıcının çok çeşitli ulusal ve uluslararası standartlara uygun olarak çalışmasına izin veren darbe test cihazı sağlamak için bu kit oluşmuştur.

PRODUCT RANGE

Elcometer Impact Tester Kit A

The Elcometer Impact Tester Kit A is supplied with a falling 1kg (2.2lb) weight with a 20mm (0.7″) punch, a stop collar, a 27mm (1.06″) die with fixing screw, a sample clamp with two fixing screws and 3mm (0.12″) and 4mm (0.15″) hexagonal wrench.

  • Part Number : KT001615KITA
  • Certification : No Certificate
  • Part Number : KT001615KITAC
  • Certification : Calibration Certificate
Elcometer Impact Tester Kit B

The Elcometer Impact Tester Kit B is supplied with a static indenter with 15.9mm (0.6″) punch, a falling 1kg (2.2lb) weight, a 12.7mm (0.5″) punch, a 16.3mm (0.64″) die with fixing screw and a 3mm (0.12″) hexagonal wrench.

  • Part Number : KT001615KITB
  • Certification : No Certificate
  • Part Number : KT001615KITBC
  • Certification : Calibration Certificate
Elcometer Impact Tester Kit C

The Elcometer Impact Tester Kit C is supplied with a static indenter with 15.9mm (0.6″) punch, a falling 2lb (908g) weight, a 16.3mm (0.64″) die with fixing screw and a 3mm (0.12″) hexagonal wrench.

  • Part Number : KT001615KITC
  • Certification : No Certificate
  • Part Number : KT001615KITCC
  • Certification : Calibration Certificate
Elcometer Impact Tester Kit D

The Elcometer Impact Tester Kit D is supplied with a falling 1kg (2.2lb) weight with 20mm (0.78″) punch and stop key, a 27mm (1.06″) die with fixing screw, a stop collar, a sample clamp with fixing screws and a 3mm (0.12″) and 4mm (0.15″) hexagonal wrench.

  • Part Number : KT001615KITD
  • Certification : No Certificate
  • Part Number : KT001615KITDC
  • Certification : Calibration Certificate
Elcometer Impact Tester Kit E

The Elcometer Impact Tester Kit E is supplied with a falling 400g (0.9lb) weight with 23mm (0.90″) punch, a 22mm (0.87″) die with fixing screw and a 3mm (0.12″) hexagonal wrench.

  • Part Number : KT001615KITE
  • Certification : No Certificate
  • Part Number : KT001615KITEC
  • Certification : Calibration Certificate
Elcometer Impact Tester Kit F

The Elcometer Impact Tester kit F is supplied with a falling 1kg (2.2lb) weight with a 20mm (0.7″) punch, a stop collar, a 27mm (1.06″) die with fixing screw, a sample clamp with two fixing screws, a 3mm (0.12″) and 4mm (0.15″) hexagonal wrench, a static indenter with 15.9mm (0.6″) punch, a falling 1kg (2.2lb) weight, a 12.7mm (0.5″) punch and 16.3mm (0.64″) die with fixing screw.

  • Part Number : KT001615KITF
  • Certification : No Certificate
  • Part Number : KT001615KITFC
  • Certification : Calibration Certificate
Elcometer Impact Tester Kit G

The Elcometer Impact Tester Kit G is supplied with a falling 1kg (2.2lb) weight with a 15.9mm (0.62”)static indenter with handle and punch, a 12.7mm (0.5”) static indenter with handle and punch, a 16.3mm (0.64”) die with fixing screw. a guide bracket with two fixing screws, a 3mm (0.12”) hexagonal wrench and a 4mm (0.16”) hexagonal wrench.

  • Part Number : KT001615KITG
  • Certification : No Certificate
  • Part Number : KT001615KITGC
  • Certification : Calibration Certificate

TECHNICAL SPECIFICATION

Part Number Description Certificate
KT001615KITA Elcometer Impact Tester Kit A
       Optional Calibration Certificate available
KT001615KITB Elcometer Impact Tester Kit B
       Optional Calibration Certificate available
KT001615KITC Elcometer Impact Tester Kit C
       Optional Calibration Certificate available
KT001615KITD Elcometer Impact Tester Kit D
       Optional Calibration Certificate available
KT001615KITE Elcometer Impact Tester Kit E
       Optional Calibration Certificate available
KT001615KITF Elcometer Impact Tester Kit F
       Optional Calibration Certificate available
KT001615KITG Elcometer Impact Tester Kit G
       Optional Calibration Certificate available
Packing List Kit A: Falling 1kg (2.2lb) weight with a 20mm (0.79”) punch; 27mm (1.06”) die with fixing screw; sample clamp with two fixing screws; stop collar*; 3mm (0.12”) and 4mm (0.16”) hexagonal wrench

Kit B: Falling 1kg (2.2lb) weight with static indenter with 15.9mm (0.6”) punch; 12.7mm(0.5”) punch; 16.3mm (0.64”) die with fixing screw; 3mm (0.12”) hexagonal wrench

Kit C: Falling 2lb (908g) weight with static indenter with 15.9mm (0.6”) punch; 16.3mm (0.64”) die with fixing screw; 3mm (0.12”) hexagonal wrench

Kit D: Falling 1kg (2.2lb) weight with 20mm (0.79”) punch and stop key; 27mm (1.06”) die with fixing screw; stop collar*; sample clamp with fixing screws; 3mm (0.12”) and 4mm (0.16”) hexagonal wrench

Kit E: Falling 400g (0.9lb) weight with 23mm (0.90”) punch; 22mm (0.87”) die with fixing screw; 3mm (0.12”) hexagonal wrench

Kit F: Falling 1kg (2.2lb) weight with a 20mm (0.79”) punch; 27mm (1.06”) die with fixing screw; Falling 1kg (2.2lb) weight with 12.7mm (0.5”) punch; sample clamp with two fixing screws; 16.3mm (0.64”) die with fixing screw; stop collar*; static indenter with 15.9mm (0.6”) punch; 3mm (0.12”) hexagonal wrench; 4mm (0.16”) hexagonal wrench

Kit G: Falling 1kg (2.2lb) weight with a 15.9mm (0.62”) static indenter with handle and punch; 12.7mm (0.5”) static indenter with handle and punch; 16.3mm (0.64”) die with fixing screw; guide bracket with two fixing screws; 3mm (0.12”) hexagonal wrench; 4mm (0.16”) hexagonal wrench

Daha fazla bilgi için

Ad Soyad:
zorunlu alan!
zorunlu alan!
Firma:
zorunlu alan!
zorunlu alan!
E-posta:
zorunlu alan!
zorunlu alan!
Telefon:
zorunlu alan!
zorunlu alan!
  • - Şehir seçiniz -
  • Adana
  • Adıyaman
  • Afyonkarahisar
  • Ağrı
  • Aksaray
  • Amasya
  • Ankara
  • Antalya
  • Ardahan
  • Artvin
  • Aydın
  • Balıkesir
  • Bartın
  • Batman
  • Bayburt
  • Bilecik
  • Bingöl
  • Bitlis
  • Bolu
  • Burdur
  • Bursa
  • Çanakkale
  • Çankırı
  • Çorum
  • Denizli
  • Diyarbakır
  • Düzce
  • Edirne
  • Elazığ
  • Erzincan
  • Erzurum
  • Eskişehir
  • Gaziantep
  • Giresun
  • Gümüşhane
  • Hakkâri
  • Hatay
  • Iğdır
  • Isparta
  • İstanbul
  • İzmir
  • Kahramanmaraş
  • Karabük
  • Karaman
  • Kars
  • Kastamonu
  • Kayseri
  • Kırıkkale
  • Kırklareli
  • Kırşehir
  • Kilis
  • Kocaeli
  • Konya
  • Kütahya
  • Malatya
  • Manisa
  • Mardin
  • Mersin
  • Muğla
  • Muş
  • Nevşehir
  • Niğde
  • Ordu
  • Osmaniye
  • Rize
  • Sakarya
  • Samsun
  • Siirt
  • Sinop
  • Sivas
  • Şanlıurfa
  • Şırnak
  • Tekirdağ
  • Tokat
  • Trabzon
  • Tunceli
  • Uşak
  • Van
  • Yalova
  • Yozgat
  • Zonguldak
- Şehir seçiniz -
zorunlu alan!
zorunlu alan!
İhtiyacınız olan özellikleri veya uygulamanız ile ilgili detayları yazınız
zorunlu alan!
zorunlu alan!