Alüminyum Ceketli 45° Açılı Tungsten Karbür Nozul

Kumlama nozulları flanşların arkası, köşelerin etrafı veya boruların içi gibi dar veya ulaşılması zor yerlere girmek için idealdir. Açılı nozul kullanımı kolaydır, aşındırıcıyı 45° açıyla dışarı atar ve güç ve dayanıklılık sağlayan alüminyum cekete sahiptir.

1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2

2″ Contractor Thread

  • Orifice Diameter :3.2mm (1/8“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :1
  • Part Number :MT28442-2C

1/4” NPSM Thread

  • Orifice Diameter :1/8” (3.2mm)
  • Length :3.26” (83mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :1
  • Part Number :MT28442-2N

2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2

2″ Contractor Thread

  • Orifice Diameter :3.2mm (1/8“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :2
  • Part Number :MT28443-2C

1/4” NPSM Thread

  • Orifice Diameter :1/8” (3.2mm)
  • Length :3.46″ (88mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :2
  • Part Number :MT28443-2N

3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2

2″ Contractor Thread

  • Orifice Diameter :3.2mm (1/8“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :3
  • Part Number :MT28444-2C

1/4” NPSM Thread

  • Orifice Diameter :1/8” (3.2mm)
  • Length :3.46″ (88mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :3
  • Part Number :MT28444-2N

1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3

2″ Contractor Thread

  • Orifice Diameter :4.8mm (3/16“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :1
  • Part Number :MT28442-3C

1/4” NPSM Thread

  • Orifice Diameter :3/16” (4.8mm)
  • Length :3.26” (83mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :1
  • Part Number :MT28442-3N

2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3

2″ Contractor Thread

  • Orifice Diameter :4.8mm (3/16“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :2
  • Part Number :MT28443-3C

1/4” NPSM Thread

  • Orifice Diameter :3/16” (4.8mm)
  • Length :3.46″ (88mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :2
  • Part Number :MT28443-3N

3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3

2″ Contractor Thread

  • Orifice Diameter :4.8mm (3/16“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :3
  • Part Number :MT28444-3C

1/4” NPSM Thread

  • Orifice Diameter :3/16” (4.8mm)
  • Length :3.46″ (88mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :3
  • Part Number :MT28444-3N

1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4

2″ Contractor Thread

  • Orifice Diameter :6.35mm (1/4“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :1
  • Part Number :MT28442-4C

1/4” NPSM Thread

  • Orifice Diameter :1/4” (6.35mm)
  • Length :3.26” (83mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :1
  • Part Number :MT28442-4N

2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4

2″ Contractor Thread

  • Orifice Diameter :6.35mm (1/4“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :2
  • Part Number :MT28443-4C

1/4” NPSM Thread

  • Orifice Diameter :1/4” (6.35mm)
  • Length :3.46″ (88mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :2
  • Part Number :MT28443-4N

3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4

2″ Contractor Thread

  • Orifice Diameter :6.35mm (1/4“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :3
  • Part Number :MT28444-4C

1/4” NPSM Thread

  • Orifice Diameter :1/4” (6.35mm)
  • Length :3.46″ (88mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :3
  • Part Number :MT28444-4N

1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5

2″ Contractor Thread

  • Orifice Diameter :8mm (5/16“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :1
  • Part Number :MT28442-5C

1/4” NPSM Thread

  • Orifice Diameter :5/16” (8mm)
  • Length :3.26” (83mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :1
  • Part Number :MT28442-5N

2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5

2″ Contractor Thread

  • Orifice Diameter :8mm (5/16“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :2
  • Part Number :MT28443-5C

1/4” NPSM Thread

  • Orifice Diameter :5/16” (8mm)
  • Length :3.46″ (88mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :2
  • Part Number :MT28443-5N

3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5

2″ Contractor Thread

  • Orifice Diameter :8mm (5/16“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :3
  • Part Number :MT28444-5C

1/4” NPSM Thread

  • Orifice Diameter :5/16” (8mm)
  • Length :3.46″ (88mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :3
  • Part Number :MT28444-5N

1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6

2″ Contractor Thread

  • Orifice Diameter :9.5mm (3/8“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :1
  • Part Number :MT28442-6C

1/4” NPSM Thread

  • Orifice Diameter :3/8” (9.5mm)
  • Length :3.26” (83mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :1
  • Part Number :MT28442-6N

2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6

2″ Contractor Thread

  • Orifice Diameter :9.5mm (3/8“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :2
  • Part Number :MT28443-6C

1/4” NPSM Thread

  • Orifice Diameter :3/8” (9.5mm)
  • Length :3.46″ (88mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :2
  • Part Number :MT28443-6N

3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6

2″ Contractor Thread

  • Orifice Diameter :9.5mm (3/8“)
  • Length :88mm (3.46″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Number of Holes :3
  • Part Number :MT28444-6C

1/4” NPSM Thread

  • Orifice Diameter :3/8” (9.5mm)
  • Length :3.46″ (88mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Number of Holes :3
  • Part Number :MT28444-6N
PED
Part Number
2″ Contractor Thread
Nozzle No.Orifice DiameterNumber of HolesLengthEntry Diameter
MT28442-2C#23.2mm (18“)188mm (3.46”)25mm (0.98”)
MT28443-2C#23.2mm (18“)288mm (3.46”)25mm (0.98”)
MT28444-2C#23.2mm (18“)388mm (3.46”)25mm (0.98”)
MT28442-3C#34.8mm (316“)188mm (3.46”)25mm (0.98”)
MT28443-3C#34.8mm (316“)288mm (3.46”)25mm (0.98”)
MT28444-3C#34.8mm (316“)388mm (3.46”)25mm (0.98”)
MT28442-4C#46.35mm (14“)188mm (3.46”)25mm (0.98”)
MT28443-4C#46.35mm (14“)288mm (3.46”)25mm (0.98”)
MT28444-4C#46.35mm (14“)388mm (3.46”)25mm (0.98”)
MT28442-5C#58mm (316“)188mm (3.46”)25mm (0.98”)
MT28443-5C#58mm (316“)288mm (3.46”)25mm (0.98”)
MT28444-5C#58mm (316“)388mm (3.46”)25mm (0.98”)
MT28442-6C#69.5mm (38“)188mm (3.46”)25mm (0.98”)
MT28443-6C#69.5mm (38“)288mm (3.46”)25mm (0.98”)
MT28444-6C#69.5mm (38“)388mm (3.46”)25mm (0.98”)

 

ASME
Part Number
NPSM Thread
Nozzle No.Orifice DiameterNumber of HolesLengthEntry Diameter
MT28442-2N#218” (3.2mm)13.26” (83mm)0.98” (25mm)
MT28443-2N#218” (3.2mm)23.46” (88mm)0.98” (25mm)
MT28444-2N#218” (3.2mm)33.46” (88mm)0.98” (25mm)
MT28442-3N#3316” (4.8mm)13.26” (83mm)0.98” (25mm)
MT28443-3N#3316” (4.8mm)23.46” (88mm)0.98” (25mm)
MT28444-3N#3316” (4.8mm)33.46” (88mm)0.98” (25mm)
MT28442-4N#414” (6.35mm)13.26” (83mm)0.98” (25mm)
MT28443-4N#414” (6.35mm)23.46” (88mm)0.98” (25mm)
MT28444-4N#414” (6.35mm)33.46” (88mm)0.98” (25mm)
MT28442-5N#5316” (8mm)13.26” (83mm)0.98” (25mm)
MT28443-5N#5316” (8mm)23.46” (88mm)0.98” (25mm)
MT28444-5N#5316” (8mm)33.46” (88mm)0.98” (25mm)
MT28442-6N#638” (9.5mm)13.26” (83mm)0.98” (25mm)
MT28443-6N#638” (9.5mm)23.46” (88mm)0.98” (25mm)
MT28444-6N#638” (9.5mm)33.46” (88mm)0.98” (25mm)

İLGİLİ ÜRÜNLER