1_1_ID1

Elcometer 12 Bar (174psi) Nozul Tutuculu ve Kaplin Bağlantılı Kumlama Hortumu

Kategoriler: , ,
   TEKLİF İSTE   

Açıklama

Maksimum 12bar (174psi) çalışma basıncı ve 3 kat güvenlik tedbiri ile 5m veya 10m uzunluklarda mevcut olan kumlama hortumu ve aparatları iç çapı 1/2″ (13mm) olup, bir naylon nozul tutucusu ile 3/4″ dökme demir bağlantı aparatı ile birlikte verilir.

Maksimum 12bar (174psi) çalışma basıncı ve 3 kat güvenlik tedbiri ile 5m veya 10m uzunluklarda mevcut olan kumlama hortumu ve aparatları iç çapı 3/4″ (19mm) olup, bir naylon nozul tutucusu ile 2″ naylon bağlantı aparatı ile birlikte verilir.

Maksimum 12bar (174psi) çalışma basıncı ve 3 kat güvenlik tedbiri ile 5m veya 10m uzunluklarda mevcut olan kumlama hortumu ve aparatları iç çapı 1″ (25mm) olup, bir nozul tutucusu ile 2″ seçilecek bir bağlantı aparatı ile birlikte verilir.

Maksimum 12bar (174psi) çalışma basıncı ve 3 kat güvenlik tedbiri ile 5m veya 10m uzunluklarda mevcut olan kumlama hortumu ve aparatları iç çapı 1 1/4″ (32mm) olup, bir nozul tutucusu ile 2″ seçilecek bir bağlantı aparatı ile birlikte verilir.

Maksimum 12bar (174psi) çalışma basıncı ve 3 kat güvenlik tedbiri ile 5m veya 10m uzunluklarda mevcut olan kumlama hortumu ve aparatları iç çapı 1 1/2″ (38mm) olup, bir nozul tutucusu ile 2″ seçilecek bir bağlantı aparatı ile birlikte verilir.

Antistatik ve Aşınmaya Dayanıklı İç Çeper

Elcometer kumlama hortumu, karbon siyahlı doğal ve stiren-bütadien kauçuk bileşiğinden üretilmiştir, DIN53516’ya göre 50mm3 aşınma direnci değerine ve R<106Ω/m anti-statik derecelendirmeye (R) sahiptir. Bu kumlamacıyı statik bir şokun neden olabileceği yaralanmalardan korumak için statik elektriği toprağa dağıtır.

2 Kat Örgü Takviyesi

Elcometer’in kumlama hortumu, hortum gücünü arttırmak ve esneklik sağlamak için 2 katlı çapraz desende yüksek orandan takviye edilmiş kordon astarlarına sahiptir.

Sert Dış Kapak

Sert hava koşullarına dayanıklı kapak, aşınmaya dayanıklı ve antistatik doğal ve kumaş izlenimli stiren-bütadien kauçuk kullanılarak üretildiğinden hortumun ömrünü uzatır.

Elcometer 1/2” (13mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder (Fine Thread) & Cast Iron Quick Coupling – 5m (16.4ft)

BSP Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :13mm (1/2“)
  • Thread Type :3/4” (19mm) Fine
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :28mm (11/8“)
  • Minimum Bend Radius :105mm (49/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH13NFSB-5

NPT / NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1/2” (13mm)
  • Thread Type :3/4” (19mm) Fine
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :11/8” (28mm)
  • Minimum Bend Radius :49/64” (105mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH13NFSN-5

Elcometer 1/2” (13mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder (Fine Thread) & Cast Iron Quick Coupling – 10m (32.8ft)

BSP Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :13mm (1/2“)
  • Thread Type :3/4” (19mm) Fine
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :28mm (11/8“)
  • Minimum Bend Radius :105mm (49/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH13NFSB-10

NPT / NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1/2” (13mm)
  • Thread Type :3/4” (19mm) Fine
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :11/8” (28mm)
  • Minimum Bend Radius :49/64” (105mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH13NFSN-10

Elcometer 3/4” (19mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :19mm (3/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :34mm (13/8“)
  • Minimum Bend Radius :155mm (67/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH19NCNB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :3/4” (19mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :13/8” (34mm)
  • Minimum Bend Radius :67/64” (155mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH19NNNN-5

Elcometer 3/4” (19mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :19mm (3/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :34mm (13/8“)
  • Minimum Bend Radius :155mm (67/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH19NCNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :3/4” (19mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :13/8” (34mm)
  • Minimum Bend Radius :67/64” (155mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH19NNNN-10

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH25NCNB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH25NNNN-5

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH25NCNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH25NNNN-10

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Cast Iron Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH25ACSB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH25ANSN-5

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Cast Iron Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH25ACSB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH25ANSN-10

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Cast Iron Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH25NCSB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH25NNSN-5

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Cast Iron Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH25NCSB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH25NNSN-10

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Nylon Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH25ACNB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH25ANNN-5

Elcometer 1″ (25mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :25mm (1″)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :38mm (11/2“)
  • Minimum Bend Radius :200mm (77/8“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH25ACNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :1″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :11/2” (38mm)
  • Minimum Bend Radius :77/8” (200mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH25ANNN-10

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH32NCNB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH32NNNN-5

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH32NCNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH32NNNN-10

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Cast Iron Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH32ACSB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH32ANSN-5

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Cast Iron Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH32ACSB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH32ANSN-10

Elcometer 11/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Cast Iron Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH32NCSB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH32NNSN-5

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Cast Iron Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH32NCSB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH32NNSN-10

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Nylon Quick Coupling – 5m (16.4ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :5m (16.4ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH32ACNB-5

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :16.4ft (5m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH32ANNN-5

Elcometer 1 1/4” (32mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :32mm (11/4“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :48mm (17/8“)
  • Minimum Bend Radius :260mm (1015/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH32ACNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/4” (32mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :17/8” (48mm)
  • Minimum Bend Radius :1015/64” (260mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH32ANNN-10

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH38NCNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH38NNNN-10

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Nylon Quick Coupling – 20m (65.6ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :20m (65.6ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH38NCNB-20

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :65.6ft (20m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Nylon
  • Part Number :BH38NNNN-20

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Cast Iron Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH38ACSB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH38ANSN-10

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Cast Iron Quick Coupling – 20m (65.6ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :20m (65.6ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH38ACSB-20

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :65.6ft (20m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Cast Iron
  • Part Number :BH38ANSN-20

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Cast Iron Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH38NCSB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH38NNSN-10

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder & Cast Iron Quick Coupling – 20m (65.6ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :20m (65.6ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH38NCSB-20

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :65.6ft (20m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Nylon
  • Quick Coupling :Cast Iron
  • Part Number :BH38NNSN-20

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Nylon Quick Coupling – 10m (32.8ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :10m (32.8ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH38ACNB-10

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :32.8ft (10m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH38ANNN-10

Elcometer 1 1/2” (38mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder & Nylon Quick Coupling – 20m (65.6ft)

2″ Contractor Thread

  • Maximum Working Pressure :12bar (174psi)
  • Internal Diameter (ID) :38mm (11/2“)
  • Thread Type :51mm (2″) Contractor
  • Hose Length :20m (65.6ft)
  • Outside Diameter (OD) :56mm (23/16“)
  • Minimum Bend Radius :305mm (121/64“)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH38ACNB-20

1 1/4” NPSM Thread

  • Maximum Working Pressure :174psi (12bar)
  • Internal Diameter (ID) :11/2” (38mm)
  • Thread Type :11/4” (32mm) NPSM
  • Hose Length :65.6ft (20m)
  • Outside Diameter (OD) :23/16” (56mm)
  • Minimum Bend Radius :121/64” (305mm)
  • Nozzle Holder :Aluminium
  • Quick Coupling :Nylon
  • Part Number :BH38ANNN-20
PED
Part NumberBH13NFSB-5BH13NFSB-10
Hose Length5m (16.4ft)10m (32.8ft)
Nozzle HolderNylonNylon
Thread Type3/4″ Fine3/4″ Fine
Quick CouplingCast IronCast Iron
Maximum Working Pressure12bar (174psi)12bar (174psi)
Internal Diameter (ID)13mm (1/2“)13mm (1/2“)
Outside Diameter (OD)28mm (11/8“)28mm (11/8“)
Minimum Bend Radius105mm (49/64“)105mm (49/64“)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)

 

ASME
Part NumberBH13NFSN-5BH13NFSN-10
Hose Length16.4ft (5m)32.8ft (10m)
Nozzle HolderNylonNylon
Thread Type3/4″ Fine3/4″ Fine
Quick CouplingCast IronCast Iron
Maximum Working Pressure174psi (12bar)174psi (12bar)
Internal Diameter (ID)1/2” (13mm)1/2” (13mm)
Outside Diameter (OD)11/8” (28mm)11/8” (28mm)
Minimum Bend Radius49/64” (105mm)49/64” (105mm)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)
PED
Part NumberBH19NCNB-5BH19NCNB-10
Hose Length5m (16.4ft)10m (32.8ft)
Nozzle HolderNylonNylon
Thread Type2″ Contractor2″ Contractor
Quick CouplingNylonNylon
Maximum Working Pressure12bar (174psi)12bar (174psi)
Internal Diameter (ID)19mm (3/4)19mm (3/4)
Outside Diameter (OD)34mm (13/8“)34mm (13/8“)
Minimum Bend Radius155mm (67/64“)155mm (67/64“)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)

 

ASME
Part NumberBH19NNNN-5BH19NNNN-10
Hose Length16.4ft (5m)32.8ft (10m)
Nozzle HolderNylonNylon
Thread Type11/4” NPSM11/4” NPSM
Quick CouplingNylonNylon
Maximum Working Pressure174psi (12bar)174psi (12bar)
Internal Diameter (ID)3/4″ (19mm)3/4″ (19mm)
Outside Diameter (OD)13/8” (34mm)13/8” (34mm)
Minimum Bend Radius67/64” (155mm)67/64” (155mm)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)
PED
Part NumberBH25NCNB-5BH25NCNB-10BH25ACSB-5BH25ACSB-10BH25NCSB-5BH25NCSB-10BH25ACNB-5BH25ACNB-10
Hose Length5m (16.4ft)10m (32.8ft)5m (16.4ft)10m (32.8ft)5m (16.4ft)10m (32.8ft)5m (16.4ft)10m (32.8ft)
Nozzle HolderNylonNylonAluminiumAluminiumNylonNylonAluminiumAluminium
Thread Type2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor
Quick CouplingNylonNylonCast IronCast IronCast IronCast IronNylonNylon
Maximum Working Pressure12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)
Internal Diameter (ID)25mm (1″)25mm (1″)25mm (1″)25mm (1″)25mm (1″)25mm (1″)25mm (1″)25mm (1″)
Outside Diameter (OD)38mm (11/2“)38mm (11/2“)38mm (11/2“)38mm (11/2“)38mm (11/2“)38mm (11/2“)38mm (11/2“)38mm (11/2“)
Minimum Bend Radius200mm (7 7/8 “)200mm (7 7/8 “)200mm (7 7/8 “)200mm (7 7/8 “)200mm (7 7/8 “)200mm (7 7/8 “)200mm (7 7/8 “)200mm (7 7/8 “)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating (R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)

 

ASME
Part NumberBH25NNNN-5BH25NNNN-10BH25ANSN-5BH25ANSN-10BH25NNSB-5BH25NNSB-10BH25ANNN-5BH25ANNN-10
Hose Length16.4ft (5m)32.8ft (10m)16.4ft (5m)32.8ft (10m)16.4ft (5m)32.8ft (10m)16.4ft (5m)32.8ft (10m)
Nozzle HolderNylonNylonAluminiumAluminiumNylonNylonAluminiumAluminium
Thread Type11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM
Quick CouplingNylonNylonCast IronCast IronCast IronCast IronNylonNylon
Maximum Working Pressure174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)
Internal Diameter (ID)1″ (25mm)1″ (25mm)1″ (25mm)1″ (25mm)1″ (25mm)1″ (25mm)1″ (25mm)1″ (25mm)
Outside Diameter (OD)11/2” (38mm)11/2” (38mm)11/2” (38mm)11/2” (38mm)11/2” (38mm)11/2” (38mm)11/2” (38mm)11/2” (38mm)
Minimum Bend Radius77/8” (200mm)77/8” (200mm)77/8” (200mm)77/8” (200mm)77/8” (200mm)77/8” (200mm)77/8” (200mm)77/8” (200mm)
Abrasion Resitance(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)

 

PED
Part NumberBH32NCNB-5BH32NCNB-10BH32ACSB-5BH32ACSB-10BH32NCSB-5BH32NCSB-10BH32ACNB-5BH32ACNB-10
Hose Length5m (16.4ft)10m (32.8ft)5m (16.4ft)10m (32.8ft)5m (16.4ft)10m (32.8ft)5m (16.4ft)10m (32.8ft)
Nozzle HolderNylonNylonAluminiumAluminiumNylonNylonAluminiumAluminium
Thread Type2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor
Quick CouplingNylonNylonCast IronCast IronCast IronCast IronNylonNylon
Maximum Working Pressure12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)
Internal Diameter (ID)32mm (11/4 “)32mm (11/4 “)32mm (11/4 “)32mm (11/4 “)32mm (11/4 “)32mm (11/4 “)32mm (11/4 “)32mm (11/4 “)
Outside Diameter (OD)48mm (17/8 “)48mm (17/8 “)48mm (17/8 “)48mm (17/8 “)48mm (17/8 “)48mm (17/8 “)48mm (17/8 “)48mm (17/8 “)
Minimum Bend Radius260mm (1015/64 “)260mm (1015/64 “)260mm (1015/64 “)260mm (1015/64 “)260mm (1015/64 “)260mm (1015/64 “)260mm (1015/64 “)260mm (1015/64 “)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)

 

ASME
Part NumberBH32NNNN-5BH32NNNN-10BH32ANSN-5BH32ANSN-10BH32NNSN-5BH32NNSN-10BH32ANNN-5BH32ANNN-10
Hose Length16.4ft (5m)32.8ft (10m)16.4ft (5m)32.8ft (10m)16.4ft (5m)32.8ft (10m)16.4ft (5m)32.8ft (10m)
Nozzle HolderNylonNylonAluminiumAluminiumNylonNylonAluminiumAluminium
Thread Type11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM
Quick CouplingNylonNylonCast IronCast IronCast IronCast IronNylonNylon
Maximum Working Pressure174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)
Internal Diameter (ID)11/4 ” (32mm)11/4 ” (32mm)11/4 ” (32mm)11/4 ” (32mm)11/4 ” (32mm)11/4 ” (32mm)11/4 ” (32mm)11/4 ” (32mm)
Outside Diameter (OD)17/8 ” (48mm)17/8 ” (48mm)17/8 ” (48mm)17/8 ” (48mm)17/8 ” (48mm)17/8 ” (48mm)17/8 ” (48mm)17/8 ” (48mm)
Minimum Bend Radius1015/64” (260mm)1015/64” (260mm)1015/64” (260mm)1015/64” (260mm)1015/64” (260mm)1015/64” (260mm)1015/64” (260mm)1015/64” (260mm)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)

 

PED
Part NumberBH38NCNB-10BH38NCNB-20BH38ACSB-10BH38ACSB-20BH38NCSB-10BH38NCSB-20BH38ACNB-10BH38ACNB-20
Hose Length10m (32.8ft)20m (65.6ft)10m (32.8ft)20m (65.6ft)10m (32.8ft)20m (65.6ft)10m (32.8ft)20m (65.6ft)
Nozzle HolderNylonNylonAluminiumAluminiumNylonNylonAluminiumAluminium
Thread Type2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor2″ Contractor
Quick CouplingNylonNylonCast IronCast IronCast IronCast IronNylonNylon
Maximum Working Pressure12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)12bar (174psi)
Internal Diameter (ID)38mm (11/2 “)38mm (11/2 “)38mm (11/2 “)38mm (11/2 “)38mm (11/2 “)38mm (11/2 “)38mm (11/2 “)38mm (11/2 “)
Outside Diameter (OD)56mm (23/16 “)56mm (23/16 “)56mm (23/16 “)56mm (23/16 “)56mm (23/16 “)56mm (23/16 “)56mm (23/16 “)56mm (23/16 “)
Minimum Bend Radius305mm (121/64 “)305mm (121/64 “)305mm (121/64 “)305mm (121/64 “)305mm (121/64 “)305mm (121/64 “)305mm (121/64 “)305mm (121/64 “)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)

 

ASME
Part NumberBH38NNNN-10BH38NNNN-20BH38ANSN-10BH38ANSN-20BH38NNSN-10BH38NNSN-20BH38ANNN-10BH38ANNN-20
Hose Length32.8ft (10m)65.6ft (20m)32.8ft (10m)65.6ft (20m)32.8ft (10m)65.6ft (20m)32.8ft (10m)65.6ft (20m)
Nozzle HolderNylonNylonAluminiumAluminiumNylonNylonAluminiumAluminium
Thread Type11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM11/4” NPSM
Quick CouplingNylonNylonCast IronCast IronCast IronCast IronNylonNylon
Maximum Working Pressure174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)174psi (12bar)
Internal Diameter (ID)11/2 ” (38mm)11/2 ” (38mm)11/2 ” (38mm)11/2 ” (38mm)11/2 ” (38mm)11/2 ” (38mm)11/2 ” (38mm)11/2 ” (38mm)
Outside Diameter (OD)23/16” (56mm)23/16” (56mm)23/16” (56mm)23/16” (56mm)23/16” (56mm)23/16” (56mm)23/16” (56mm)23/16” (56mm)
Minimum Bend Radius121/64” (305mm)121/64” (305mm)121/64” (305mm)121/64” (305mm)121/64” (305mm)121/64” (305mm)121/64” (305mm)121/64” (305mm)
Abrasion Resistance(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)(50mm3, DIN53516)
Anti-Static Rating(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)(R<106 Ω/m)

Blast Hose Assemblies – Data Sheet
Blast Hose Assemblies – Data Sheet (ASME Compatible)

İLGİLİ ÜRÜNLER