Alüminyum Ceket ve Su Jeti Sistemli Tungsten Karbür Venturi Astar

Toz kontrolünün gerekli olduğu ortamlarda kullanım için ideal olan kumlama nozulu, suyu aşındırıcı ile karıştırarak atmosfere yayılan toz miktarını düşürür. Sağlamlık ve dayanıklılık sağlayan bir alüminyum kılıfa sahip olan bu nozul daha sert aşındırıcılarla kullanılabilir. Kumlama nozulu plastik bir conta ile birlikte tedarik edilir.

Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.3

2″ Contractor Thread

  • Orifice Diameter :4.8mm (3/16“)
  • Length :120mm (4.72″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Part Number :MT28326-3C

1/4” NPSM Thread

  • Orifice Diameter :3/16” (4.8mm)
  • Length :4.72″ (120mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Part Number :MT28326-3N

Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.4

2″ Contractor Thread

  • Orifice Diameter :6.35mm (1/4“)
  • Length :150mm (5.9″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Part Number :MT28326-4C

1/4” NPSM Thread

  • Orifice Diameter :1/4” (6.35mm)
  • Length :5.9″ (150mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Part Number :MT28326-4N

Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.5

2″ Contractor Thread

  • Orifice Diameter :8mm (5/16“)
  • Length :160mm (6.3″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Part Number :MT28326-5C

1/4” NPSM Thread

  • Orifice Diameter :5/16” (8mm)
  • Length :6.3″ (160mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Part Number :MT28326-5N

Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.6

2″ Contractor Thread

  • Orifice Diameter :9.5mm (3/8“)
  • Length :175mm (6.89″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Part Number :MT28326-6C

1/4” NPSM Thread

  • Orifice Diameter :3/8” (9.5mm)
  • Length :6.69″ (170mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Part Number :MT28326-6N

Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.7

2″ Contractor Thread

  • Orifice Diameter :11mm (7/16“)
  • Length :210mm (8.27″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Part Number :MT28326-7C

1/4” NPSM Thread

  • Orifice Diameter :7/16” (11mm)
  • Length :8.27″ (210mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Part Number :MT28326-7N

Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.8

2″ Contractor Thread

  • Orifice Diameter :12.5mm (1/2“)
  • Length :230mm (9.05″)
  • Entry Diameter :25mm (0.98″)
  • Thread Type :51mm (2″) Contractor
  • Part Number :MT28326-8C

1/4” NPSM Thread

  • Orifice Diameter :1/2” (12.5mm)
  • Length :9.05” (230mm)
  • Entry Diameter :0.98″ (25mm)
  • Thread Type :11/4” (32mm) NPSM
  • Part Number :MT28326-8N
PED
Part Number
2″ Contractor Thread
Nozzle No.Orifice DiameterLengthEntry Diameter
MT28326-3C#34.8mm (316“)120mm (4.72″)25mm (0.98″)
MT28326-4C#46.35mm (14“)150mm (5.9”)25mm (0.98”)
MT28326-5C#58mm (516“)160mm (6.3”)25mm (0.98”)
MT28326-6C#69.5mm (38“)175mm (6.89”)25mm (0.98”)
MT28326-7C#711mm (716“)210mm (8.27”)25mm (0.98”)
MT28326-8C#812.5mm (12“)230mm (9.05”)25mm (0.98”)

 

ASME
Part Number
NPSM Thread
Nozzle No.Orifice DiameterLengthEntry Diameter
MT28326-3N#3316” (4.8mm)4.72″ (120mm)0.98″ (25mm)
MT28326-4N#414” (6.35mm)5.9” (150mm)0.98” (25mm)
MT28326-5N#5516” (8mm)6.3” (160mm)0.98” (25mm)
MT28326-6N#638” (9.5mm)6.69” (170mm)0.98” (25mm)
MT28326-7N#7716” (11mm)8.27″ (210mm)0.98” (25mm)
MT28326-8N#812”  (12.5mm)9.05” (230mm)0.98” (25mm)

İLGİLİ ÜRÜNLER